Sliding driveway gates
Wrought iron
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Henderson, NV
A driveway gate in Henderson does more than mark the edge of a property. It controls who can pull in, keeps the wrong vehicles out, and runs on a motor system that has to survive summer pavement temperatures past 110 degrees without failing. At Carver Gate Repair Henderson, we install and service driveway gates the way they should be handled: written pricing before any work begins, background-checked technicians at your door, and a 365-Day Done Right Promise that covers every repair in writing for a full year. When a gate won’t open, you don’t have a gate. You have a wall between you and your own garage. Call (775) 307-6571 and a live person answers, no matter the hour.
This page covers the specific work we do under our Gate Installation service for Henderson homeowners. If you’re starting fresh with a new driveway gate, need a motor retrofitted onto an existing gate, or have a gate that’s been limping along for months, the details below tell you what to expect, what it costs here, and how we work.
When You Need Driveway Gate
Some driveway gate problems are obvious. Others hide until the worst possible moment. Here are the situations we see most often across Henderson, from Green Valley Ranch to Anthem to MacDonald Ranch:
- A veined or cracked concrete post has shifted. Henderson’s soil shifts with temperature and irrigation patterns, and a post that moves even half an inch can bind the gate at the hinge and burn out a motor.
- You bought a home with a gate but no remote, no keypad, and no idea what brand the operator is. The previous owner left without explaining the system. We identify the motor, test it, and either program new remotes or recommend a replacement unit.
- The gate opens halfway, reverses, or stops dead in the middle of the cycle. In our experience across Henderson, this often traces to a failing limit switch or sensor alignment, not the motor itself. A technician who jumps straight to “you need a new operator” without testing the switches is guessing.
- You’re building or renovating and the driveway gate needs to be installed before the final inspection. Henderson code enforcement expects gates installed to manufacturer spec, including proper mounting, fall protection, and entrapment sensing. We install it right the first time.
- Your gate is manual and you’re finished with it. Climbing out of the truck in August to drag a 400-pound gate across the driveway gets old. A swing or slide operator turns it into a keypad-and-remote system.
- Wind damage has bent the gate or pulled the operator loose. Henderson gets gusts that slam gates against their stops. Mounting bolts that worked for years can tear out in one bad storm.
Our Driveway Gate Process
We run every driveway gate job, install or repair, through the same set of steps for one reason: the homeowner should never be surprised by a price, a part, or a technician at the door. Here’s how it goes:
- You call (775) 307-6571 and talk to a person. Not a menu tree. Not a callback request. We ask what the gate is doing, what brand the motor is if you know it, and where the property is. We set a firm arrival window before we hang up.
- A background-checked, uniformed technician arrives and inspects the complete system. Gate leaf, hinges, posts, motor, limit switches, safety sensors, and any loop detectors in the driveway. We write down what’s wrong and what’s still working.
- You get a written price before any work starts. Parts, labor, and time are on paper. The number does not move when the job opens up. If we find a deeper issue mid-repair, we stop and get your approval on a new written price before touching it.
- We do the work with the right parts for the brand you have. We stock and order parts for LiftMaster, FAAC, BFT, and Linear systems, among the nine gate motor brands our technicians train on. No universal brackets wallowed out with a drill to “make it fit.”
- We test the full cycle, clean the site, and walk you through what was done. You see the gate run before we button up. You get the guarantee in writing. The work area looks like we were never there except the gate now works.
Driveway Gate Pricing in Henderson
What you’ll pay for driveway gate work in Henderson depends on three things: the type of gate, the motor’s condition, and whether we’re repairing what’s there or installing new. For a broader look at pricing, see our guide on How Much Does Gate Installation Cost? (2026 Price Guide) - Henderson, NV. Here are honest ranges based on what we see in this market:
- Gate repair (hinge, wheel, post, or leaf alignment): $180 to $480, depending on the extent of the mechanical work and whether welding or post work is required.
- Gate motor repair (limit switch, capacitor, board, or sensor): $220 to $520, depending on the motor brand and part availability. Some older boards on DoorKing and Linear units cost more to source than the labor to install them.
- Full gate motor replacement, including swing or slide operator: $1,200 to $3,400 installed, depending on gate weight, leaf length, and which operator brand fits the gate. A heavy ornamental iron gate in Anthem needs a heavier operator than a 12-foot ranch gate in a Green Valley subdivision.
- New driveway gate installation (gate and motor, swing or slide): $4,000 to $12,000, driven mostly by gate material, length, and whether the driveway needs concrete work for posts or track. Wrought iron and steel cost more than aluminum; a slide gate needs a level concrete run; a swing gate needs strong, deep-set posts.
- Keypad, remote, and accessory installation: $150 to $400, with equipment included.
Those are honest Henderson numbers, not teaser rates. The biggest cost swings come from gate weight and driveway preparation, not from the motor itself. A technician who quotes you a $900 “full gate motor replacement” on a steel gate is going to hit you with add-ons before the day is over. We give you one written number, up front, and it’s the number you pay. Estimates are free. Call (775) 307-6571 for an exact quote on your gate.
Why Henderson Homeowners Choose Carver Gate Repair
Every door-to-door operator in Clark County says they “do gates.” Very few work on gates exclusively, and fewer still can name the nine motor brands we service daily: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a generalist shows up and sees a FAAC swing operator, the homeowner gets one of two outcomes: a shrug, or a parts-swap guess. We know before we arrive what we’re likely dealing with because we ask the right questions on the call.
We operate under The Garrison Standard, which is a written set of rules rather than a slogan. Three of them matter most to a Henderson homeowner with a gate problem:
- Written price before the work starts, every time. No verbal estimates that grow. The number on the paper is the number on the invoice.
- 365-Day Done Right Promise. Every repair carries a written guarantee good for one full year from the date of service. If the repair fails inside that window, we return and fix it at no charge. Not “we’ll take a look.” We fix it.
- Technicians who are background-checked and uniformed. When you open the door for a gate tech, you’re letting a stranger onto your property. Ours arrive in uniform, with identification, and you know who’s on the job before they touch your gate.
Lonnie Burke leads our Henderson crew. He grew up in the trades and has run gate and garage systems long enough to recognize the difference between a motor that needs a $30 limit switch and one that needs a full replacement. His rule is simple: fix what’s broken, replace what’s failed, and never sell a homeowner a part they don’t need. That discipline has kept Carver Gate Repair as one of the most trusted gate service names in the Las Vegas valley since 2008 as part of the Garrison Partners family.
For the full scope of our installation work, visit our Gate Installation in Henderson page. From our home page you can also reach our motor repair and general repair service pages.
FAQs – Driveway Gate
How much does a driveway gate cost in Henderson, NV?
A new driveway gate in Henderson typically runs between $4,000 and $12,000 installed, with material and site preparation driving most of the variance. Gate motor replacement alone runs $1,200 to $3,400, and a gate repair starts around $180. Your exact price depends on gate size, weight, material, and whether concrete work is needed for posts or track. Call (775) 307-6571 for a free written estimate.
Can you install a driveway gate on a sloped driveway?
Yes. Sloped driveways in Henderson hillside neighborhoods like MacDonald Highlands often require a swing gate rather than a slide gate, or a Pedestrian Gate-style slide gate with the track built up on a concrete pad to maintain a level run. The grade determines which approach works, and we measure that during the site inspection before recommending anything. A wrong motor choice on a slope will destroy the operator in under a year.
Do you service LiftMaster and FAAC driveway gate motors?
Yes. Our technicians are trained on LiftMaster, FAAC, BFT, Linear, and five other major gate motor brands. We stock common parts locally and order brand-specific boards and arms with a short lead time. When a FAAC operator fails, it’s almost always a limit switch or capacitor issue that costs far less than replacing the whole unit, and we’ll tell you that honestly.
How long does a driveway gate motor last in Henderson?
In the Henderson climate, a quality gate motor that’s properly installed and maintained will typically last 8 to 15 years, with heat being the biggest shortener of lifespan. Motors in direct, unshaded sun on south-facing gates run hotter and fail sooner than shaded installations. Regular cleaning of limit switches and checking mounting bolts adds years. If yours is near or past the decade mark and making new noises, call (775) 307-6571 and we’ll assess it before it strands you.
Is a driveway gate repair covered by the 365-Day Done Right Promise?
Yes. Every repair we perform carries a written guarantee good for a full year from the service date. If the same part or the same issue fails within that year, we come back and make it right at no charge. The guarantee is in writing, not verbal, as part of The Garrison Standard.
Get Your Driveway Gate Fixed or Installed Today
The gate at your driveway is either working or it’s not. If it’s not, the fix doesn’t get cheaper by waiting. Call (775) 307-6571 now. You’ll talk to a live person, set a firm arrival window, and get a written price before any work starts. From a single hinge repair in Whitney Ranch to a full ornamental swing gate install in Anthem, we handle it under The Garrison Standard: honest prices, trained technicians, and a guarantee that’s written, not spoken.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson.