A Carver company - serving Henderson, NV

Pedestrian Gate in Henderson, NV

Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

Wrought iron
Wrought iron
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pedestrian Gate in Henderson, NV

A pedestrian gate is a separate, person-sized entry built into or alongside a larger driveway gate system. It lets you walk through without cycling the full driveway gate every time you need to grab the mail, take the dog out, or let a visitor in. Carver Gate Repair Henderson offers Gate Installation services, repairs, and retrofits for pedestrian gates throughout Henderson, including Green Valley, Anthem, Seven Hills, Inspirada, and McCullough Hills. Call (775) 307-6571 for a written quote before any work starts.

Most Henderson homes with a driveway gate eventually add a pedestrian gate, and for good reason. Running a 16-foot driveway gate just to walk to the curb wears out the motor, the wheels, and the limit switches faster than anything else we see. A properly hung pedestrian gate keeps that wear off the main system and gives you a quicker way in and out. We install stand-alone pedestrian gates as well as gates integrated into new Gate Installation in Henderson builds. We also retrofit pedestrian gates into existing fence lines where a full driveway gate already exists.

Lonnie Burke runs this shop, and we do the work the same way across every job: written price before we start, background-checked technicians on site, and a written guarantee on the entire pedestrian gate installation for a full year. No exceptions.

When You Need Pedestrian Gate

Henderson homeowners call us for pedestrian gate work for a few specific reasons, and the situations below cover most of them. If any of these sound familiar, you’re in the right place.

  • The main driveway gate cycles constantly. Every time someone walks out to the street, the big gate opens and closes. In Green Valley and Anthem, we see this wear out motors two to three years early. A pedestrian gate stops that cycle count from climbing.
  • You installed a pool, added a casita, or changed your backyard layout. Henderson code requires self-closing and self-latching gates around pool areas. A properly built pedestrian gate meets that requirement without hanging a flimsy big-box gate.
  • The existing pedestrian gate sags, drags, or won’t latch. Henderson’s dry heat and caliche-heavy soil shift posts over time. A gate that scraped fine last year can bind by summer. We rebuild the post footings, rehang the gate, and match the latch hardware.
  • You want keypad or intercom access without opening the driveway. Delivery drivers, landscapers, and pool service techs need a way in. A pedestrian gate with its own keypad, tied into your existing LiftMaster or FAAC system, gives them access without giving them the driveway.
  • HOA or community standards require a separate pedestrian entry. Several Henderson HOA communities, particularly in Inspirada and MacDonald Highlands, require pedestrian access separate from the vehicle gate. We build to those specs regularly.
  • You’re replacing an old wooden gate that’s rotted or warped. Henderson sun bleaches and splits wood gates fast. We install steel and aluminum pedestrian gates that hold their alignment through the hottest summers.

Our Pedestrian Gate Process

We follow a set process on every pedestrian gate job in Henderson, whether it’s a simple hinge replacement or a full gate and post installation. Here’s how it goes.

  1. Site check and measurements. We measure the opening, check post depth and footing condition, and look at what’s underground. Caliche layers in Henderson can turn a simple post dig into a jackhammer job, and we’d rather know that before we quote.
  2. Written price delivered before any work starts. You get a line-item quote covering materials, hardware, and labor. The number you see is the number you pay. No add-ons at the door.
  3. Post setting and framing. We set posts in concrete at the depth Henderson’s wind loads require, then square and plumb the frame before any gate goes up. Rushing this step is why most gates sag within a year.
  4. Gate hanging and hardware. We hang the gate on adjustable hinges, set the latch and closer tension, and align the gate so it swings clean without drag. If you’re adding a keypad or integration with LiftMaster, FAAC, BFT, or Linear operators, we wire and test it during this step.
  5. Final checklist and walk-through. You walk the gate, we adjust anything that needs it, and we run through the written guarantee before we leave. The site is clean when we go.

Pedestrian Gate Pricing in Henderson

How Much Does Gate Installation Cost? (2026 Price Guide) - Henderson, NV For pedestrian gates, installation in Henderson typically runs between $900 and $2,800 depending on the gate material, width, whether new posts are needed, and whether you’re adding access control. Simple hinged steel pedestrian gates with a basic latch land on the lower end. Custom-width aluminum gates with keypads, self-closing hinges, and integration into an existing FAAC or LiftMaster system land on the higher end. Replacement of an existing pedestrian gate, where posts are still sound, often runs between $600 and $1,400.

What actually moves the price in Henderson:

  • Post condition. If the existing posts are set shallow, rusted at the base, or leaning, we replace them. That’s materials, concrete, and labor. Skipping it means redoing the whole job in 18 months.
  • Gate material and finish. Powder-coated steel is the standard. Aluminum costs more upfront but never rusts, which matters with Henderson’s hard water and sprinkler overspray.
  • Access control. A standalone keypad or intercom adds equipment cost. Tying the pedestrian gate into an existing driveway gate control system adds wiring and programming, but it’s usually worth doing once.
  • Soil conditions. Caliche and rock can extend dig time. We tell you upfront if your post locations sit in rock so the quote reflects it.

Every quote is delivered in writing before work begins. Call (775) 307-6571 and ask for a pedestrian gate quote. Someone answers the phone around the clock, and the estimate is free.

FAQs – Pedestrian Gate

How much does a pedestrian gate cost in Henderson?

Plan on $900 to $2,800 for a full pedestrian gate installation in Henderson, with replacement of an existing gate on sound posts running $600 to $1,400. The spread comes down to gate material, post condition, and access control. Call (775) 307-6571 for a line-item quote in writing before any work starts.

Can you install a pedestrian gate next to my existing driveway gate?

Yes, and that’s one of the most common jobs we do in Henderson. We build the pedestrian gate into the existing fence line, set new posts, and hang the gate to match the height and style of your current driveway gate. If you want the pedestrian gate tied into your existing Driveway Gate LiftMaster, FAAC, or Linear access system, we handle the wiring and programming on the same visit.

How long does pedestrian gate installation take?

Most Henderson pedestrian gate installations finish in one day, including post setting and hardware. Custom gate fabrication adds a few days while the gate is built. We give you a straight arrival window and a written completion expectation before the job starts.

Is a wooden or metal pedestrian gate better in Henderson?

Metal, for most Henderson properties. Steel and aluminum hold alignment longer, don’t warp in the dry heat, and don’t need the constant rehanging that wood gates require here. We install steel and aluminum pedestrian gates almost exclusively for that reason. If you prefer wood for the look, we’ll build it, but we’ll tell you the maintenance tradeoff directly.

Why Henderson Homeowners Use Carver Gate Repair

We work to The Garrison Standard on every pedestrian gate job. That means a written price before work starts, a background-checked and uniformed technician on site, and a written guarantee on the installation good for a full year from the date of service. If something fails inside that year, we come back and make it right at no charge. That’s the 365-Day Done Right Promise, and it’s in writing.

We’re part of the Garrison Partners family, operating to the same standard since 2008. Our technicians are trained on LiftMaster, FAAC, BFT, and Linear systems, so if your pedestrian gate needs to talk to your driveway operator, we don’t hand off to another company. We handle it from post to keypad.

Call (775) 307-6571 for a free estimate on a pedestrian gate in Henderson. A live person answers, day or night, including weekends and holidays. When you’re ready, home is where you’ll find the full list of what we do.

Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson.

Need Gate Repair help in Henderson? Licensed & insured · 30-60 min response · free estimates
Call (775) 307-6571
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Carver Gate Repair Henderson responds fast. No obligation.

By reaching out through this form, you agree to our Privacy Policy and consent to being contacted by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch