Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across North Las Vegas
Gate installation in North Las Vegas runs $1,800 to $6,500 for a standard driveway gate with operator, depending on gate material, size, and whether power is already run to the gate location. Most installations take two to four days from measure to final commissioning, not counting city permit wait times. Our crews work throughout North Las Vegas regularly, from Eldorado to Aliante, and we know what the heat, the soil, and the newer construction here do to gate hardware. Call (775) 307-6571 and a live person answers, any hour, any day.
Why Carver Gate Repair Henderson Is North Las Vegas’s Preferred Gate Installation Company
Gate work in North Las Vegas has a pattern we see constantly. Newer subdivisions, big lots, heavy decorative iron gates, and original builder hardware that was never matched to the weight it would carry. Our technicians work on nine gate motor brands and have replaced hundreds of hinge posts that had pulled out of stucco columns. The Garrison Standard governs every job: written price before any work starts, background-checked and uniformed technicians on site, and a written guarantee on every repair, good for a full year.
Our reputation in North Las Vegas is built on a simple thing. We show up when we say we will, the written price is the price, and if something is not right, we come back under the guarantee without an argument. Calls are answered by a person, all day and all night, because a gate that will not open at 10 p.m. on a Sunday is not a Monday problem. Lonnie Burke leads the team, and every job carries the 365-Day Done Right Promise in writing.
Styles & brands we work with
Electric Gate Installation in North Las Vegas
Electric Gate Installation in North Las Vegas means more than hanging a gate slab. It means running or verifying low-voltage power from the house to the gate location, installing the operator arm or slide track, wiring the safety photocells and edge sensors, setting limit switches, and testing reversal pressure. A full electric gate installation in North Las Vegas typically runs $3,200 to $6,500 including the gate, operator, power run, safety equipment, and commissioning. If conduit and power are already at the gate, the number drops toward the lower end.
Operator Selection and Power
North Las Vegas summers cook plastic gears and circuit boards faster than almost anywhere else in the country. Direct sun exposure on an operator box can shorten a control board’s life to three or four years. We recommend operators with metal gear trains where possible, and we mount control boxes so they are shaded or oriented away from afternoon sun. If no power exists at the gate, we run dedicated conduit and a proper breaker circuit, not an extension cord buried under landscaping.
Safety Edges and Photocells
Every electric gate installation includes safety photocells and a reversing edge, wired correctly and tested under load. This is not a upsell. In North Las Vegas, where driveways often cross sidewalks in newer subdivisions, a closing gate without working safety sensors is a serious hazard. We test entrapment pressure and reversal for both open and close directions before we call the job done.
Driveway Gate Installation in North Las Vegas
Driveway Gate Installation in North Las Vegas typically runs $1,800 to $4,500 for a standard single swing or sliding gate without power work, and $3,800 to $6,500 with an operator, power run, and safety equipment. The largest cost drivers are gate material and size. A 12-foot steel swing gate costs less than a 16-foot ornate wrought-iron double gate, but the second one wears out undersized hardware far faster.
Concrete Work and Ground Conditions
North Las Vegas soil is dry, alkaline, and shifts as it settles. Gate posts set in shallow concrete or surface-mounted onto stucco columns fail quickly here. Proper driveway gate installation means post footings dug to at least 30 inches, set in concrete, and given time to cure before the gate is hung. We do not cut this step short, and we will not reuse a weak existing footing. If the gate is surface-mounted on a stucco column, we reinforce the mounting points with heavier anchors and plates.
Double Gates and Corner Lots
Double driveway gates are common in North Las Vegas because many subdivisions have wide lots with extra vehicle parking. A double gate means two slabs, two hinge sets, and more force on the center supports. We see the most hinge failures on corner lots in neighborhoods like Aliante and Eldorado, where wind gusts hit gates broadside. If you are on a corner lot, we will recommend hinge and post sizing that matches the wind load, not just the gate weight.
Trusted Brands We Service in North Las Vegas
Our technicians are trained on equipment from LiftMaster, FAAC, BFT, and Linear, among nine total brands. That matters in North Las Vegas because many builders installed whatever operator was cheapest at closing, then homeowners inherited a system with no local brand support. We carry common control boards, limit switch assemblies, remote transmitters, and safety sensors in our service vehicles, so a trip to North Las Vegas does not end with “we will order the part and call you back in a week.” If the part is not on the truck, we tell you that before we schedule the visit.
Common Gate Installation Problems We See in North Las Vegas Homes
- Undersized hinges bending under heavy iron gates. Original builders often used lightweight residential hinges on decorative wrought-iron gates that weigh 400 pounds or more. The hinge leaves bend within months, the gate sags at the latch side, and the opener motor burns out trying to move the load.
- Hinge posts pulling out of stucco columns. Surface-mounted hinges on stucco columns fail as the underlying wood or metal framing settles. In dry North Las Vegas conditions, the stucco cracks around the anchor points, and the post starts to lean.
- UV-baked operator electronics. Direct desert sun degrades plastic gears and circuit boards. We regularly replace operator control boards on systems that are only three or four years old because the housing offered no shade.
- Wood gates warping and cracking. The dry climate minimizes rust but pulls moisture out of wood gate slabs. Without proper sealing and framing, wood gates warp within a few summers and begin to bind against the latch.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in North Las Vegas, NV
Here are straight numbers for North Las Vegas. A basic single swing driveway gate, manual, runs $1,800 to $2,800 installed. Add an electric operator, control board, safety photocells, remote transmitters, and the power run from the house, and the job lands between $3,800 and $5,500. A full double gate with ornate steel, electric operation, and safety equipment runs $5,000 to $6,500. Sliding gates cost slightly more than swing gates because of the track, rollers, and longer power run. Every quote is written and delivered before any work starts. The number on the quote is the number on the invoice. Call (775) 307-6571 and we will schedule a free measure and give you a written price.
We Also Serve Cities Near North Las Vegas
Our gate installation crews cover North Las Vegas and the surrounding cities, including Nellis AFB, Henderson, and Boulder City. If your property sits just outside North Las Vegas borders, call anyway. Our technicians track every job, and our Gate Installation team knows the roads and traffic patterns across the Valley. For the full picture of services across our service area, see Gate Installation in North Las Vegas.
Serving North Las Vegas, NV - Our Local Coverage Area
We’re based in the North Las Vegas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Las Vegas
Because the original builds frequently used lightweight hinges on heavy iron gates. In newer subdivisions where homes went up fast after 2000, builder hardware was often residential-grade and rated for far less weight than the decorative gate slab it supported. The hinge leaves bend, the gate loses alignment within months, and the sag puts constant strain on the operator motor. Our crew recently replaced a sagging swing gate in the Eldorado area where the original hinge post had pulled completely out of the stucco column. We reset the post footing with deeper concrete and installed heavier-duty hinges, then rehung the gate and tested the safety photocells before commissioning the LiftMaster operator. Call (775) 307-6571 to have someone measure your gate and give you a written price for the correction.
Yes, if your gate is automated. A loop detector senses a vehicle’s metal mass on the driveway side of the gate and tells the operator not to close while a car is sitting there. In North Las Vegas, where driveways often cross sidewalks and vehicles park close to the gate, a loop detector is the difference between a gate that waits for the car to clear and one that closes onto a bumper. We install loop detectors as standard equipment on automated driveway gate installations. They are not optional safety equipment, and they are included in the written quote.
Yes, but we will be honest about limitations. North Las Vegas gets abundant sunlight, which helps solar charging, but the intense heat degrades solar panel output efficiency and shortens battery life. A solar opener for a single swing gate typically adds $600 to $1,200 to installation cost, depending on panel wattage and battery capacity. If the gate sees heavy daily cycling, a hardwired low-voltage power run is more reliable. We install both, and we will tell you plainly which one fits your gate’s cycle count and your exposure to afternoon sun.
Sag at the hinge post means the post itself is moving or the hinges are failing, not that the gate slab is warped. The fix usually means pulling the gate, resetting the post footing deeper in concrete, installing heavier-duty hinges rated for the gate’s actual weight, and rehanging the slab. On corner lots in North Las Vegas, where wind gusts hit gates hard, we may also recommend a larger post or an additional gusset at the hinge mount. The correction takes one to two days after the new footing cures, and it is covered under our written guarantee for a full year.
Because a closing gate without a working photocell is a pinning hazard for kids, pets, and anyone walking past the driveway. North Las Vegas subdivisions often have sidewalks on the lot line, right where the gate swings or slides. The photocell sends an infrared beam across the gate path. If the beam is broken, the gate stops and reverses. We test photocells on every installation and every repair, and we will never bypass or remove one to get a gate moving again. If your gate closes without stopping, call (775) 307-6571 and have a technician check it before someone gets hurt.
Get a Written Price Before Any Gate Work Starts in North Las Vegas
If you are in North Las Vegas and your gate is sagging, your operator is cooked, or you are planning a new gate installation, call (775) 307-6571. A live person answers around the clock, seven days a week. You will get a free measure, a written price, and a straight answer about what the job involves. No numbers that change at the door. No crew you have to wonder about. Background-checked, uniformed technicians, a full-year written guarantee, and work done to The Garrison Standard.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving North Las Vegas and the Valley with gate installation, gate repair, and gate motor repair.