A Carver company - serving Henderson, NV
Carver Gate Repair Henderson gate repair team

Gate Company in Enterprise - Fast Local Response, Upfront Pricing

Same-day gate service with the price agreed before we start. Licensed and insured engineers covering repairs, operators and access control across the whole area.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Call Now - 24/7 Dispatch

We answer around the clock

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Wrought ironWrought iron
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Enterprise, NV

Gate work in Enterprise, NV follows a pattern most of Las Vegas doesn’t share. Since 2000, this part of the valley has filled in with stucco-and-tile tract homes inside master-planned communities, which means most gates are newer, decorative, and governed by an HOA’s design rules. The Mojave sun beats on powder-coated steel all summer, wind pushes dust into tracks, and hard water stains hardware faster than homeowners expect. That combination, newer construction plus strict community standards plus desert exposure, is what we handle every day. Call (775) 307-6571 when a gate stops working right.

Call (775) 307-6571

Why Enterprise Homes Are Different

Enterprise’s housing stock is almost entirely 2000s-and-later single-family homes. Those gates are typically powder-coated steel or wrought-iron driveway and pedestrian models, often matched to a stucco wall and tile roof the HOA approved years ago. When a hinge sags or a finish fades, the repair has to look like the original install. That’s not a preference. It’s a violation letter waiting to happen.

The climate does real work on these gates. Intense sun fades dark finishes and warps composite or wood components. Wind pushes fine desert dust into rollers and tracks until they bind. And Colorado River hard water, which every Enterprise home runs on, slowly corrodes metal hardware and leaves mineral staining that eats at powder coating. In neighborhoods like Mountain’s Edge and Southern Highlands, where gates sit inside the HOA’s controlled exterior palette, a finish that’s “close enough” often isn’t. We match color and design to the community’s standard before the repair is written up, because repairing it twice costs more than doing it right once.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Our Main Enterprise Services

Most Enterprise calls come down to one of three jobs: a gate that won’t open, a gate that needs replacing, or a motor that stopped responding. Each has its own page with local pricing and detail.

Gate Repair in Enterprise

Repair work in Enterprise usually means a sagging hinge, a bent track, a broken weld, or a finish repair on a gate the HOA flagged. Because most gates are newer, the frame and steel are often sound, but the moving hardware takes the desert abuse. We carry hinges, rollers, brackets, and touch-up coatings that match common Enterprise color palettes. The full scope of what we fix, and what it costs, is on the Gate Repair in Enterprise page.

Gate Repair in Enterprise

Gate Installation in Enterprise

New gate work in Enterprise almost always starts with the HOA. The style, color, and sometimes the manufacturer are pre-approved, so we measure, quote against the community’s standards, and install what the association will sign off on. Driveway gates, pedestrian gates, and matching hardware are all standard for us. The process from measure to written quote to install is laid out on the Gate Installation in Enterprise page.

Gate Installation in Enterprise

Gate Motor Repair in Enterprise

Motors fail in two ways around here: capacitors and control boards burn out in the summer heat, and limit switches or loop detectors stop reading correctly after dust works its way in. We diagnose before we quote. The motor page covers swing operators, articulating arms, sliding gate motors, and the common failure points on each. See Gate Motor Repair in Enterprise for the full breakdown.

Gate Motor Repair in Enterprise
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (775) 307-6571

What happens when you call

  1. 1
    A real person answersNo phone trees - you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Brands We Service in Enterprise

We work on LiftMaster, FAAC, BFT, and Linear systems, among the nine brands our technicians train on. The right parts for these brands stay stocked locally so common motor repairs don’t wait on a shipment. See our brands for the full list and what we service on each.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Enterprise, NV

Service Typical range in Enterprise
Gate repair (minor) $150 – $350
Gate repair (major) $350 – $800
Gate installation (single swing) $1,800 – $6,500
Gate installation (double swing) $3,500 – $12,000
Gate installation (slide) $2,800 – $9,000
Pedestrian gate installation $600 – $2,500
Gate motor repair $180 – $450
Gate motor replacement $600 – $1,600
Control board replacement $300 – $800
Limit switch replacement $150 – $350
Loop detector replacement $250 – $500
Track repair or replacement $200 – $700

What pushes a price up in Enterprise is usually the HOA’s finish requirement or a motor that needs a new control board rather than a simple adjustment. Whatever the number, it’s written down and agreed to before any work starts. The price on the quote is the price on the invoice.

Neighborhoods We Serve in Enterprise

We run calls across Enterprise regularly, from the southern edge of Mountain’s Edge up through the communities around Southern Highlands and along the newer subdivisions west of Decatur. Most repair calls in this area get a same-day or next-day visit, and emergency garage and gate calls are handled around the clock.

  • Mountain’s Edge
  • Southern Highlands
  • Rhodes Ranch
  • Inspirada (adjacent)
  • The Foothills

Service Area – Cities Near Enterprise

If you’re on the edge of Enterprise or in a neighboring community, we also work across Henderson, NV, Spring Valley, NV, Nellis AFB, NV, and Green Valley, NV. Dispatch is coordinated from the brand’s Las Vegas office, so a crew can reach most addresses in the Enterprise area quickly.

Serving Enterprise, NV - Our Local Coverage Area

We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Gate Company in Enterprise

Ready to get started? Free estimates · 30-60 min response in Enterprise
Call (775) 307-6571

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Enterprise Customers Say

★★★★★ 5.0 from 3+ reviews

"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."

- Don H.

"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."

- Chris W.

"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."

- Angela P.

How It Works in Enterprise

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Enterprise - we'll get back to you fast. No obligation.

By reaching out through this form, you agree to our Privacy Policy and consent to being contacted by telephone, text message, or email about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch