Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Henderson, NV
Gate repair in Henderson means working with what the desert gives us: extreme heat, fine dust, and neighborhoods built with gates that HOA boards expect to look a certain way. Whether it’s a sagging wrought iron driveway gate in Green Valley or a swing operator that quit after a dust storm in Anthem, the job usually comes down to the same thing: fix it right, match the neighborhood standard, and stand behind the work. Our crew serves the entire Henderson valley from the Las Vegas dispatch office. Call (775) 307-6571 and a live person answers.
Why Henderson Homes Are Different
Henderson’s housing stock runs from 1990s stucco tracts to newer gated subdivisions around MacDonald Highlands and Lake Las Vegas. A lot of those homes came with steel or wrought iron driveway gates that have now been through twenty or thirty summers of 110-degree days. UV exposure fades paint and weakens seals. Electronics inside gate operator boards cook faster in Henderson than almost anywhere in the country. We replace more scorched control boards and heat-warped track rails here than in any other market we serve.
The other piece is the HOA. Henderson’s master-planned communities carry strict architectural covenants. A gate repair that changes the look of a street-facing entrance can get flagged by a compliance committee. So we match paint, match hardware profile, and match the existing ironwork pattern where possible. That’s not a courtesy; it’s a requirement in places like Seven Hills and Inspirada. We’ve done enough Henderson work to know what gets passed and what gets sent back.
Styles & brands we work with
Our Main Henderson Services
Most calls we get in Henderson come down to two situations: a gate that won’t open, and a gate that needs to be replaced entirely. Each has its own page with full pricing and details.
Gate Repair in Henderson
Repair work in Henderson usually involves welding cracked iron at stress points, replacing hinges that have sagged under the weight of a steel gate on shifting soil, or re-hanging a gate after the post moved. Henderson’s expansive clay expands and contracts with seasonal moisture, which shifts posts over time. We fix the gate, then fix the reason it failed so the repair holds. Full details and local pricing are on the Gate Repair in Henderson page.
Gate Installation in Henderson
New gate installations in Henderson have to clear HOA approval before the first post hole is dug in most communities. We measure the opening, help with the arch review package when needed, and work from a written price that includes the gate, hardware, posts, and labor. Wrought iron and steel are the standard materials in this market, often with ornamental details that match surrounding properties. See the Gate Installation in Henderson page for the full breakdown.
Gate Motor Repair in Henderson
Henderson’s heat is the usual culprit when a swing or slide operator fails. Control boards overheat, capacitor sets degrade, and monsoon-season dust builds up inside limit switches and gearboxes until the motor binds. We carry BFT, Linear, Viking, and Ghost Controls parts on the truck for same-day motor service in most cases. Read the Gate Motor Repair in Henderson page for motor-specific pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Henderson
We work on BFT, Linear, Viking, and Ghost Controls systems every week in Henderson, along with the rest of our brands. The truck carries common boards, remotes, and loop detectors for these four names, which means most motor repairs don’t wait on a parts order.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Henderson, NV
| Service | Typical range in Henderson |
|---|---|
| Gate repair service call – diagnostic | $75 – $125 |
| Hinge replacement (per hinge) | $95 – $185 |
| Weld repair at stress crack | $120 – $260 |
| Track rail realignment (slide gate) | $150 – $310 |
| Gate opener board replacement | $265 – $520 |
| Limit switch replacement | $110 – $235 |
| Full gate replacement with standard steel | $1,700 – $3,800 |
| Custom ornamental iron gate | $3,200 – $7,500 |
| Wrought iron gate repair with paint match | $275 – $575 |
| Slide gate motor replacement | $850 – $1,600 |
| Swing gate operator replacement | $750 – $1,450 |
Custom ornamental work in Henderson’s luxury subdivisions pushes toward the higher end of those ranges, as does any job that requires HOA approval paperwork. Every Henderson customer gets a written price before work begins, and that number does not move at the door.
Neighborhoods We Serve in Henderson
We run calls across the entire Henderson valley, from older Green Valley streets to the newer west-side subdivisions. Here’s a representative sample of where we’re working on a regular basis:
- Green Valley
- Anthem
- Seven Hills
- MacDonald Highlands
- Inspirada
Most Henderson calls get a same-day or next-day response, depending on the time of year. Summer months run heavy, so morning slots fill first.
Service Area – Cities Near Henderson
We serve Henderson as our primary market, and we also cover the surrounding valley communities. Crews regularly work in Boulder City, NV for older ranch-style gates, North Las Vegas, NV for newer track-home subdivisions, and Nellis AFB, NV for base-adjacent housing.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Henderson
Our crews stage from the Las Vegas dispatch office and typically reach Henderson calls the same day during normal business hours. Emergency calls, like a gate stuck open overnight, get a live person on the phone around the clock at (775) 307-6571, and we’ll tell you honestly when someone can be there.
Repairs that match the existing style and color generally don’t need HOA permission, but our recommendation in covenant-controlled communities like Seven Hills and Anthem is to check with your board first. Replacements and style changes almost always require architectural review. We’ll help with the submission paperwork.
Yes. Monsoon dust gets into gearboxes, limit switches, and sensor lenses. After a heavy dust event, it’s common for Henderson gates to stop mid-cycle or lose their safety-edge calibration. A service visit usually involves cleaning components and recalibrating travel limits, and it’s cheaper than letting a binding gearbox damage the motor. Call (775) 307-6571 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Henderson Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.