Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Henderson
Gate repair in Henderson rarely waits for a convenient moment. A gate that won’t open traps a car in the driveway before work, or worse, leaves a home exposed overnight. We run crews into Henderson every day from the metro dispatch office, so we’re usually at your door within a few hours of your call. Homeowners in Green Valley, Seven Hills, and Anthem call us because we show up with the right parts, quote a written price before touching a bolt, and finish the job tidy. If you need a technician now, call (775) 307-6571 and a live person answers.
Why Carver Gate Repair Henderson Is Henderson’s Preferred Gate Repair Company
Henderson homeowners have a low tolerance for gate contractors who show up late, quote one number, then hand over an invoice for another. We work to a different rule. Every job follows The Garrison Standard – written prices, background-checked uniformed technicians, and a 365-Day Done Right Promise in writing. Lonnie Burke, who runs our Henderson operation, holds every crew member to that standard on every call.
The gate systems in Henderson have their own personality. The master-planned communities here, from Anthem to MacDonald Highlands to Lake Las Vegas, are not like the older neighborhoods across the valley. Homeowners here deal with HOA architectural committees, builder-grade operators that were undersized from day one, and monsoon dust that finds its way into every sensor. Our Gate Repair team knows these conditions because we work inside them weekly, not occasionally.
When a homeowner in Henderson calls, they get a live person on the phone, not a callback queue. That matters at 7 a.m. when a gate won’t open and a school drop-off is waiting.
Styles & brands we work with
Sliding Gate Repair in Henderson
Sliding gate repair in Henderson usually means correcting a gate that’s started dragging, jumping the track, or refusing to close when the loop detector gets confused. The sliding gates here, especially on the wider lots in Anthem and along Horizon Ridge, are heavier than most, and they ride on steel wheels over concrete tracks that have sat through fifteen to twenty years of summer heat. A typical sliding gate repair in Henderson runs $240 – $520, depending on whether we’re replacing rollers, reshimming the track, or bringing the motor’s drive chain back to tension.
Track and Roller Corrections
When the wheels wear unevenly, the gate panel starts to drag and the motor works harder than it should. We check the track for concrete heaving and replace rollers in pairs so the panel rides level. If the track itself has shifted, a cold patch and re-bed of the embedded rail usually solves it without ripping out the driveway.
Operator Repairs and Refits
Builders put slide operators in Henderson driveways that were barely strong enough when the gate was new. Ten years of silt and heat later, the motor and gearbox are tired and may need Henderson Gate Motor Repair. We replace the worn drive components rather than charging for a new full system, when that’s the honest fix. The written quote you approve is the price you pay, no door surprises.
Wrought Iron Gate Repair in Henderson
Wrought iron gate repair in Henderson is often about welding back what the desert heat and shifting soil have pulled apart. The custom iron gates in Green Valley Ranch and the newer ornamental gates in MacDonald Highlands lean, crack at the scroll welds, or separate where the top rail meets the pickets. Repairs here typically run $280 – $650, depending on how much welding is needed and whether the gate needs to come off its hinges to be squared on the truck.
Weld and Rust Repair
Henderson’s dry air slows rust compared to a coastal city, but the heat and monsoon humidity still get to unpainted welds and the bottom rail. We grind back failing joints, weld them properly, and patch the finish so the repair does not stand out. If your HOA cares about the original ornamental finish, we match it – that requirement is stronger in Henderson than almost anywhere else in the valley.
Hinge and Sag Correction
Clay soil under Henderson expands and contracts with moisture, and gate posts slowly drift. A hinge post that’s moved even an inch and a half out of plumb makes a wrought iron gate drag and bind. We cut the hinges free, re-weld them to the corrected position, and if the post itself shows signs of movement, we’ll tell you straight whether it needs concrete rather than faking it with a shim.
Trusted Brands We Service in Henderson
We carry parts on the trucks for the openers most common in Henderson: BFT, Linear, Viking, and Ghost Controls among them. That means a condenser board, a limit switch, or a new arm assembly does not require a three-day wait on a shipping label. When a Viking swing operator in Seven Hills shuts down, we usually have the control board and the knowledge to swap it on the first visit, and the written guarantee covers that repair for a full year. If it fails inside that window, our crew returns free of charge.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Henderson Homes
- Thermal shutdowns on builder-grade operators. The LiftMaster and Linear units installed when many 1990s and 2000s Henderson homes were built were never sized for 110°F afternoons. The circuit boards overheat, the thermal sensor trips, and the gate stops working exactly when you need it. We replace the board or upsize the operator, not both, depending on what the breakdown shows.
- Post lean and sag on clay soil. Henderson’s expansive clay pushes fence and gate posts around as moisture levels change. A leaning hinge post drags the gate across the rack, wears the motor, and eventually binds it shut. We correct the gate geometry and tell you when the post itself needs to be reset in new concrete.
- Dust and monsoon damage to sensors. Henderson’s dust storms coat loop detectors and photocell lenses with fine silt. A gate that refuses to close, or reverses for no reason, usually means a sensor cannot see what it’s supposed to see. The fix is often a cleaning and recalibration, not a parts replacement.
- HOA-driven aesthetic constraints. Henderson HOAs, especially in Anthem and MacDonald Highlands, don’t want visible weld blobs or a mismatched opener. Repairs have to work and disappear. We match original iron profiles, finishes, and operator housings as closely as the market allows, which takes longer than a patch job but keeps the architectural committee quiet.
Pricing for Gate Repair in Henderson, NV
Henderson gate repair prices sit in a predictable band. Weld and hinge work runs $280 – $650. Sliding gate track and roller corrections land at $240 – $520. A full swing operator replacement with new arms and a safety edge typically lands between $1,100 – $2,400, and adding automation to a manual gate runs $1,800 – $3,500 depending on the operator and whether we’re pulling new conduit for power and photocells. The number that matters is the one on your written quote before we begin. We don’t hand over a growing invoice at the end. If a repair needs more work than the quote anticipated, the crew stops and calls you first with a new written number. That’s The Garrison Standard, and it’s non-negotiable on every Henderson job.
We Also Serve Cities Near Henderson
Our crews cover Gate Repair in Henderson and the surrounding communities daily, including Boulder City, Nellis AFB, and North Las Vegas. If you’re a few minutes outside Henderson proper, the same written-price guarantee and live-answer phone coverage still apply.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Henderson
Yes. We match the original iron profile, scroll pattern, and finish on ornamental gate repairs in Henderson, and we’ve done exactly that in Anthem and MacDonald Highlands where the architectural committees inspect closely. Before we weld, we photograph the existing work and confirm the finish match so the repair reads original.
Because it was probably undersized from the start. Builders in Henderson’s 1990s and 2000s tract communities installed operator boards rated for mild climates, and a 110°F afternoon pushes them past their thermal limit. The fix is often a board replacement or an upsize to a heavier-duty operator, not a whole new system. We’ll tell you which one after we open the housing and test the thermal circuit.
Usually yes. We run low-voltage conduit along the hinge side or use a buried single conduit run, then mount the operator and arms without cutting across the driveway surface. On Henderson lots where the panel and post are already in good shape, adding automation runs $1,800 – $3,500 and the new system is covered by the same written one-year guarantee. Call (775) 307-6571 for a measured quote.
Dust has coated the loop detector or safety photocell lenses. When a sensor can’t read the ground loop or the beam, the operator’s safety logic tells it to stop or reverse. We clean the lenses, clear the loop detector housing, and recalibrate the sensitivity. In most cases no parts are needed, and the gate returns to normal the same visit.
If the gap between the gate and the post widens toward the top, or the gate drags only when you lift it slightly, the post is usually moving in the clay soil. If the gate sags evenly and the post is still plumb, the hinge welds or the frame itself have given way. We’ll put a level on the post, lift the panel, and tell you which of the two you’re dealing with before quoting any repair.
If your gate is down, dragging, or simply will not hold adjustment, call (775) 307-6571. A live person answers in Henderson, day or night, and the written quote is free. Gate Repair crews serve Henderson every day of the week.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, working to The Garrison Standard.