Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across Henderson
When a gate motor stops working in Henderson, you need a technician who understands the specific failures this city’s gates experience. Gate motor repair in Henderson typically runs $185 to $420 depending on whether we’re replacing a limit switch, rebuilding a gearbox, or installing a new operator. Most calls in Henderson are answered same-day or next morning, and we dispatch from our Las Vegas office with crews stationed to reach neighborhoods like Green Valley Ranch, Anthem, and MacDonald Highlands quickly. Call (775) 307-6571 and you’ll speak with a live person who can schedule a written-price diagnostic on the spot.
Why Carver Gate Repair Henderson Is Henderson’s Preferred Gate Motor Repair Company
Henderson homeowners deal with a particular set of gate problems: builder-grade operators that never matched the gate’s weight, HOA covenants that restrict what you can install, and heat that punishes electronics every summer. Carver Gate Repair works exclusively on gates and motor systems. That’s what we do in Henderson, and it means the technician at your door has already seen your exact failure mode dozens of times in this city’s newer subdivisions.
Every Henderson job runs on The Garrison Standard. The price is written down before work starts, the technician is background-checked and in uniform, and the repair carries a 365-Day Done Right Promise in writing. If the repair fails inside a year, we return and fix it at no charge. Lonnie Burke leads our Henderson crews, and the call center is staffed by a live person around the clock, including weekends and holidays. No voicemail, no call-back queue, no waiting until Monday.
We understand HOA rules here. Henderson’s master-planned communities have architectural review committees with specific expectations about gate appearance, operator placement, and conduit routing. We work to those standards so your repair doesn’t trigger a compliance flag. That matters in Henderson. It matters in Inspirada, Lake Las Vegas, and Tuscany too.
Styles & brands we work with
Gate Operator Repair in Henderson
Gate Operator Repair in Henderson usually means one of three things: the motor has burned out, the control board has failed, or the drive mechanism (chain, gear, or rack) has worn past tolerance. Henderson’s builder-heavy housing stock means many operators were under-spec’d from day one. A typical gate operator repair in Henderson runs $220 to $480, with a new operator replacement starting around $650 on the low end for a standard-duty unit.
Motor and Gearbox Replacement
When a swing arm or slide gear motor burns out in Henderson, the cause is often thermal stress from 110°F summers combined with a gate heavier than the motor’s rated duty cycle. We remove the failed motor, verify the gate’s actual weight and swing resistance, then install a motor matched to the real load, not the original builder’s guess. Re-gearing a slide operator in Henderson homes typically runs $260 to $540 depending on brand and accessibility.
Control Board and Sensor Repair
Circuit boards in Henderson gate operators crack solder joints when the housing warps under repeated heat cycling. We see this constantly in Anthem and Seven Hills. Repairing or replacing a control board runs $190 to $390 in Henderson. Safety photocells clogged by monsoon dust get cleaned, re-aimed, and tested to UL 325 standards during every call.
Gate Motor in Henderson
Gate Motor problems in Henderson fall into two camps: the motor that failed in a system that worked for years, and the motor that was never right from the start. Henderson homeowners frequently call us about builder-installed operators that are undersized for heavy ornamental gates in MacDonald Highlands or the custom ironwork common in Anthem. Replacing a gate motor in Henderson costs between $580 and $1,400 for the operator itself, with installation and programming adding $350 to $600 depending on the site.
Adding Automation to a Manual Gate
Henderson built a lot of manual gates in the 1990s and early 2000s. Homeowners later decide they want automation, and that’s where things get complicated. Many of those gates never had conduit run beneath the driveway. We trench, run new conduit to code, pull conductor for power and safety edges, and install an operator sized correctly for the gate. A full automation retrofit in Henderson generally lands between $2,800 and $5,500 when trenching and new conduit are required.
Upgrading Undersized Builder Operators
If your LiftMaster or Linear operator in Henderson has failed twice in five years, the motor isn’t the only problem. The gate itself is likely too heavy or too wind-loaded for the operator’s rating. We re-spec the operator, upgrade to a commercial-duty unit when needed (FAAC, BFT, or Viking are common replacements), and add a heavier rack or articulating arm. This is the kind of Gate Motor Repair that actually holds.
Trusted Brands We Service in Henderson
Our Henderson crews carry parts for the brands already installed in this city’s homes: LiftMaster, FAAC, BFT, Linear, Viking, and DoorKing. We service Elites, Ghost Controls, and Mighty Mule too. Because we stock common boards, limit switches, and gear kits locally, a Henderson repair often happens in one visit. If your operator is a decade old and trouble-prone, we’ll tell you straight whether repair or replacement is the better money.
Common Gate Motor Repair Problems We See in Henderson Homes
- Motor burnout from heat and weight. Henderson summers push operator housings past 140°F inside, and when the gate itself is heavy ornamental iron, the motor works harder than it was designed to. Burnout arrives early.
- Circuit board failure. Solder joints crack when boards expand and contract through Henderson’s daily 40-degree temperature swings. Intermittent operation is the usual first symptom.
- Phantom obstructions from monsoon dust. Dust storms in July and August coat photocell lenses and safety edges. The operator reverses for no visible reason or refuses to close at all.
- Grinding gears and stripped racks. Slide gates in Henderson frequently strip their rack-and-pinion gears because the builder installed a residential-grade rack on a heavy gate. The teeth shear slowly, then the gate jams halfway.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor Repair in Henderson, NV
Here’s what Henderson homeowners can expect. A diagnostic visit with a written quote runs $79, and that fee is credited toward the repair if you proceed. Minor repairs like limit switch adjustment or sensor realignment run $140 to $240. Control board replacement runs $190 to $390. Motor replacement runs $260 to $540. Complete operator replacement, installed and programmed, runs $1,000 to $2,000 for standard-duty units and $2,000 to $3,800 for commercial-duty swing or slide operators. The written price you approve is the price you pay. No moving number at the door. Call (775) 307-6571 for an exact quote on your gate.
We Also Serve Cities Near Henderson
Our crews serve Henderson and the surrounding area, including Boulder City, Nellis AFB, and North Las Vegas. If you’re a few miles outside Henderson and need gate motor work, call us. We schedule through the same live-person line and the same written-price guarantee applies.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Henderson
Dust storms coat the safety photocells and sensor edges with fine grit, which causes the operator to read a false obstruction and refuse to move. The fix is a thorough cleaning, realignment, and testing of the sensors, which runs about $140 to $200 in Henderson. In severe cases, dust gets inside the motor housing and wears the brushes. Call (775) 307-6571 and we’ll diagnose it.
Yes. We trench a new conduit run to code depth, pull conductor for power and safety edges, and install an operator matched to your gate’s weight. A full automation retrofit in Henderson with trenching runs $2,800 to $5,500 depending on driveway width and soil. The written quote is free.
Both. Henderson’s heat cycles stress the circuit board, and builders routinely pair lightweight residential operators with heavy ornamental gates. When the motor works against a load above its rating, it fails years early. We re-spec the operator for the gate’s actual weight and wind load, not the original builder’s assumption.
Yes. Most Henderson master-planned communities, especially in Anthem, MacDonald Highlands, and Inspirada, have architectural review rules covering gate appearance and operator placement. We install to the existing aesthetics and keep the work clean so your HOA walkthrough passes. If your HOA needs documentation, we provide it.
That sound is almost always a stripped rack gear or a worn drive sprocket. Henderson slide gates with builder-grade racks lose teeth over time, and the motor grinds as the pinion slips. The repair involves replacing the rack section and re-aligning the drive, typically $350 to $650 in Henderson depending on gate length. Call us for a written quote.
Call Carver Gate Repair Henderson for Gate Motor Repair
If your gate motor is down in Henderson, call (775) 307-6571. You’ll get a live person, an honest answer, and a written price before any work begins. Lonnie Burke and our Henderson crews work to The Garrison Standard: background-checked technicians, uniformed and respectful, a clean site when we leave, and a full-year written guarantee on every repair. We’re already working in neighborhoods across Henderson, and we’ll fit you into the schedule fast.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Henderson and surrounding communities.