Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Whitney
Gate installation in Whitney runs $850 – $4,200 for most residential work, with sliding gates on long driveways and solar-powered openers landing at the higher end. That’s a real range, not a guess. We dispatch crews to Whitney from our Las Vegas office, and most installations are scheduled within five to seven business days after the written quote is approved. Lonnie Burke leads the operation, and every job follows The Garrison Standard: a written price before work starts, background-checked and uniformed technicians on site, and a written one-year guarantee on the entire installation.

We know Whitney differently than a general contractor from across town does. The soil here moves. The wind loads wide gates like a sail. And the stucco walls that frame so many Whitney front yards hold moisture in ways neighboring planned communities don’t. Those three facts change how a gate should be built here. Call (775) 307-6571 for a free estimate, and we’ll quote the job based on what’s actually on your property, not a stock price sheet.
Key Takeaways:
- Typical Whitney gate installation: $850 – $4,200, with written pricing before any work begins.
- We install sliding, swing, pedestrian, double, security, and driveway gates across Whitney, NV.
- Solar-powered operators are common on Whitney’s long rural driveways where running mains is impractical or costly.
- Every installation carries a written one-year guarantee under the 365-Day Done Right Promise.
- Crews are background-checked, uniformed, and trained on Viking, FAAC, BFT, and Linear operators.
Why Carver Gate Repair Henderson Is Whitney’s Preferred Gate Installation Company
Whitney homeowners tend to ask the same three questions before they sign anything: Will you show up on time? Will the price stay where you said it would? And will the gate still work a year from now? Those questions come from experience with no-show contractors and moving numbers. The Garrison Standard exists because of that experience. Since 2008, every Carver Gate Repair location has operated under the same rules: written price before work starts, background-checked technicians, and a written guarantee the customer can hold in their hand.
The 365-Day Done Right Promise is the guarantee in writing, good for a full year from the date of service. If something fails inside that window, our crew returns and makes it right at no charge. No argument, no invoice, no second visit fee. That’s the standard, not an upsell.
When you call, a live person answers. It doesn’t matter if it’s 3:00 p.m. on a Tuesday or 11:00 p.m. on a holiday. There is no voicemail box and no call-back queue. You get a human being who can schedule the visit and answer questions about your gate. Lonnie Burke and the team serve Whitney directly, and we know the streets out here: Nellis Boulevard, Boulder Highway, Russell Road, and the older ranch lots off of Tropicana Avenue.
We’ve replaced gates in Whitney where the original install was done by a fencing company, not a gate specialist. The welds were thin. The posts weren’t set deep enough for the soil. The opener was too small for the panel’s weight. Those jobs get redone properly, and the difference is visible in the first week.
Styles & brands we work with




Sliding Gate Installation in Whitney
Sliding Gate Installation in Whitney usually means a long driveway, a wide entrance, or a property where a swing gate would block the drive as it opens. We measure the opening, set the post footings to a minimum depth of 4 feet to handle Whitney’s expansive clay, and install a steel track, roller assembly, and operator matched to the panel’s weight. A basic single-track sliding gate on a shorter driveway runs $1,400 – $2,800. A heavier steel slide gate with a high-cycle operator for a wide rural entrance lands between $2,500 and $4,200.
Post Footings for Whitney Soil
Whitney’s clay soil expands when wet and contracts when dry. A footing poured to 2 feet in Las Vegas proper may be fine there; in Whitney, that same footing heaves and throws the gate post out of plumb within a few seasons. We pour 4-foot-deep footings with rebar cages for every sliding gate post on Whitney jobs, because the failure mode here is predictable.
Wide-Span Wind Loading
A 20-foot slide gate on an acreage entrance catches afternoon wind differently than a compact city gate. The rack and pinion take the strain if the panel twists. On those jobs we specify a heavier track gauge, a stronger rack, and an operator rated above what the panel weight alone would suggest. That’s not upsell. It’s what keeps the gate cycling when the wind comes up out of the southeast.
Gate Opener Installation in Whitney
Gate Opener Installation in Whitney often means either retrofitting an opener onto an existing manual gate or replacing an opener that’s been killed by dust, heat, or an undersized solar bank. We pair the operator to the gate’s weight, width, and cycle count. A standard opener install on a residential driveway gate runs $750 – $1,500. A solar-charged opener with a battery bank for a longer rural entrance runs $1,800 – $2,800, depending on panel size and battery capacity.

Solar Banks for Long Driveways
On Whitney acreage lots where running mains to the gate post costs more than the opener itself, a solar panel and deep-cycle battery bank is the practical choice. The mistake we see regularly: a homeowner installs a panel rated for a compact gate opener, then hangs a 20-foot steel gate on it. The battery dies after a few cloudy or dusty days, and the gate won’t cycle. We size the panel and battery to the gate’s actual load and Whitney’s winter sun angle, not the summer peak.
Safety Edges and Loop Detectors
An opener without obstacle detection is a liability. We install safety photocells at the gate opening and, where the driveway meets the road, a loop detector that prevents the gate from closing on a vehicle. This is included in our written quote, not added later.
Trusted Brands We Service in Whitney
We stock parts for Viking, FAAC, BFT, and Linear operators, which covers most of what’s already installed on Whitney driveways. When a homeowner calls because an old FAAC swing operator failed, we don’t have to special-order a board and make them wait two weeks. Our technician shows up with the common boards, limit switches, and remotes for these brands in the truck. For Whitney’s rural gate installs, Viking operators are common because they handle wide-span sliding gates well on solar. Linear and BFT are more frequent on mid-size residential swing gates. If your gate runs on something else, tell us the brand when you call and we’ll confirm parts availability before the visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Whitney Homes
- Post footing heave from expansive clay: Whitney’s soil swells after flash floods and shrinks in summer. Shallow footings lift gate posts out of plumb, so the gate scrapes or stalls on an opener that was fine when installed. We correct this with deep footings and proper drainage at the base.
- Weep-hole moisture trapped behind hinge plates: Many Whitney stucco block walls have no weep holes, so after rare heavy rains, water sits behind hinge plates and rusts the bolts from the inside. The hinge looks fine until it snaps. We replace the hinge and, where practical, add small weep holes at the base of the wall section to let moisture escape.
- Undersized solar banks on wide rural gates: A solar opener sized for a small yard gate will fail on a 20-foot ranch gate after a few low-sun or dusty days. We size solar panels and battery banks to the gate’s actual load and Whitney’s winter sun, not summer peak.
- Wind-load twist on long swing gates: A wide single-swing gate on an acreage entrance acts like a sail in afternoon winds. The hinge post twists, the gate sags, and the opener burns out pulling against the misalignment. We address this with a heavier hinge post, a drop bolt on the latch end, and an operator rated for the wind load.
Pricing for Gate Installation in Whitney, NV
Gate installation in Whitney, NV runs $850 – $4,200 depending on the gate type, width, material, and whether power is already at the post. A basic pedestrian or driveway swing gate with a manual latch starts around $850 – $1,400. A sliding driveway gate with an opener lands in the $1,400 – $2,800 range. A wide solar-powered steel slide gate on a rural driveway is $2,500 – $4,200. The quote you get before work starts is the price you pay, in writing, per The Garrison Standard. We don’t reprice a job once it’s open. Call (775) 307-6571 and we’ll schedule a site visit, take measurements, and hand you a written quote on the spot. Estimates are free.
We Also Serve Cities Near Whitney
Our crews cover Gate Installation in Whitney and the surrounding communities of Henderson, Enterprise, Spring Valley, and Nellis AFB. If you’re on the edge of Whitney or just outside it, call us and we’ll confirm coverage. Our Gate Installation team works the whole area with the same written-price standard and the same one-year guarantee.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Whitney
Yes. Solar openers work on long Whitney driveways, not just ranch gates. The key is sizing the panel and battery bank to the gate’s width, weight, and how often it cycles. We install solar-powered Viking and FAAC operators on Whitney acreage lots where running mains to the post is impractical or expensive. Call (775) 307-6571 for a site visit and written quote.
It’s common in Whitney specifically because many stucco block walls here were built without weep holes. Rain gets behind the hinge plate, sits against the bolt, and rusts it from inside. The fix is replacing the hinge and bolts with galvanized or stainless hardware and, where practical, drilling small weep holes at the base of the wall. We see this after every monsoon season. Call us for an inspection and a written repair quote.
Around 16 to 18 feet, wind load starts to matter more than panel weight. A 20-foot-plus slide gate on an open Whitney driveway catches afternoon wind and twists, which strips racks and burns out undersized operators. We specify a heavier track, a stronger rack, and an operator rated above the panel weight on those spans. A site visit gives us the real number. Call (775) 307-6571.
Yes. A keypad opens the gate, but it won’t stop the gate from closing on a car. A loop detector senses a vehicle on the driveway and holds the gate open until the car clears. We install loop detectors as standard on any opener that closes automatically. It’s included in the written quote, not added later.
Not necessarily. If the wall is structurally sound, we add weep holes at the base, replace rusted hinges and bolts, and treat the area. Replacing the wall section is only needed if the block has spalled or the rebar has rusted through. We’ll tell you which situation you have during the estimate. Call (775) 307-6571 for a free inspection.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Whitney since 2008.