Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
Gate repair in Whitney usually means one of three things: a swing gate that drags, a slide gate that grinds, or an opener that runs but won’t move the gate. We handle all three, and most Whitney jobs are diagnosed and quoted within an hour of arrival. Call (775) 307-6571 and you’ll speak to a live person who can schedule a background-checked technician to your driveway, not a call center. We serve every Whitney neighborhood from the older ranch-home streets near Boulder Highway to the stucco subdivisions east of Nellis Boulevard, and we carry the parts that fail most often in this specific climate.
Why Carver Gate Repair Henderson Is Whitney’s Preferred Gate Repair Company
Whitney homeowners call us because we show up with a written price, not an opening bid that grows once the hinges come off. That’s The Garrison Standard, and it’s been the operating rule since 2008. Lonnie Burke runs the crew here, and he’s built the Whitney schedule around one fact: gate failures in this part of Clark County are rarely simple. Sandy soil shifts posts. Monsoon grit packs tracks. Stucco hides rust until a bolt snaps. A technician who treats every Whitney gate like it’s in a planned Las Vegas community will misdiagnose the job on the first visit.
Our Gate Repair technicians work nine motor brands and see Whitney’s specific failure patterns every week. We dispatch from the Las Vegas metro office, but the crews run local routes through Whitney, so drive times are short and parts runs don’t eat your afternoon. Every repair carries a written 365-Day Done Right Promise. If the repair fails inside a year, we return and fix it at no charge, no argument.
Styles & brands we work with
Metal Gate Repair in Whitney
Metal gate repair in Whitney covers steel and wrought-iron gates that have sagged, seized, or snapped hardware. Whitney’s desert temperature swings, over 100°F in summer and dropping fast after dark, expand and contract metal gates daily. That cycle fatigues welds at the hinge post and loosens the bolts that hold everything square. We straighten frames, re-weld torn posts, replace hinge plates, and set the gate so it swings without dragging the operator’s gear teeth.
Hinge and Post Replacement
A leaning hinge post is behind most sagging metal gates in Whitney. The original footing is often only 18 to 24 inches deep in sandy soil, not enough to hold a heavy steel panel through a decade of wind and use. We cut the post free, pour a deeper concrete footing, and set new hinge hardware so the gate carries its weight the way it should.
Weld and Rust Repair
Rust on a Whitney metal gate usually starts where the hinge plate bolts into a stucco block wall. No weep holes, trapped monsoon moisture, and within a few seasons the bolts are rusted through from the inside. We replace the hardware, treat the rust, and re-mount the hinge plate with drainage in mind. If the gate frame itself is cracked, we weld the split and reinforce the corner before it tears further.
Wood Gate Repair in Whitney
Wood gate repair in Whitney handles the chain-link and wooden gates common on the older ranch homes built between the 1960s and 1980s. These gates are lighter than steel, but Whitney’s UV exposure dries out wood fast, splitting rails and pulling screws loose from the frame. A split rail lets the gate drop, which throws the latch out of alignment and strains the opener arm if one is installed. We replace rotted rails, re-hang gates on new hinges, and brace the frame so it holds its shape in the heat.
Realignment and Latch Work
When a wood gate won’t latch, the fix is rarely just a new latch. Whitney’s shifting soil settles posts, and the gate panel shifts with it. We re-set the post, re-hang the gate, and align the latch and strike so the gate closes clean and stays closed. If an automatic opener is mounted, we check the operator’s limit switch so the motor doesn’t fight a misaligned gate every cycle.
Bracing and Rot Repair
Rot in a Whitney gate usually starts at ground contact, where occasional wash runoff keeps the bottom rail damp. We cut out the rotted section, splice in treated lumber, and add a diagonal brace so the gate doesn’t parallelogram over time. The work is stained to match, and the gate comes out stronger than the original framing.
Trusted Brands We Service in Whitney
We service and repair FAAC, BFT, Linear, and Viking openers, along with five other major brands. Whitney has a mix of older FAAC and BFT swing operators on the ranch-style homes and newer Linear slide operators on the stucco subdivision gates. We stock drive gears, limit switches, and control boards for these systems locally, which means a repair in Whitney doesn’t wait on a parts truck from across the valley. If your opener is dead or coded out, our technician carries the diagnostic tools and the replacement parts to resolve most jobs the same day.
Common Gate Repair Problems We See in Whitney Homes
- Sagging swing gates from shallow post footings. Whitney’s sandy, shifting soil lets hinge posts lean over time. The gate starts dragging and the opener’s gears strip while the motor still works fine. We set a deeper footing and re-hang the gate square.
- Grinding slide gates after a flash flood. Runoff from the washes around Whitney carries grit into the gate track. That grit packs into the rollers and overloads the rack and pinion drive until the safety photocell trips. We clean the track, replace worn rollers, and adjust the drive.
- Snapped bolts hidden behind stucco. Post-1980s Whitney stucco walls often have surface-mounted hinge plates with no weep holes. Monsoon moisture collects behind the plate, rusts the bolts from the inside, and one day the gate tears free. We replace the hardware and add drainage before re-mounting.
- Openers that run but won’t move the gate. Daily temperature swings expand and contract Whitney’s metal gates, fatiguing the operator arm and throwing off the limit switch calibration. We replace the worn arm, re-set the limits, and test the full cycle before leaving.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Whitney, NV
Most gate repairs in Whitney run between $185 and $600 depending on what failed. A hinge or latch replacement typically costs $185 to $285. Re-setting a leaning post in concrete runs $300 to $475, including the new footing. A weld repair on a steel gate frame runs $150 to $350 per area. A full operator replacement, motor and arm, runs $650 to $1,400 depending on the brand and gate weight. Wood gate rail replacement runs $225 to $400 including lumber and hardware. You’ll get a written price before any work starts, and that number doesn’t change at the door. Call (775) 307-6571 to schedule a free estimate.
We Also Serve Cities Near Whitney
Our crews run daily routes through Whitney and the surrounding area, including Henderson, Enterprise, Spring Valley, and Nellis AFB. If you’re just outside Whitney, call and we’ll tell you which day we’re in your neighborhood.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Whitney
The panel isn’t the problem. The hinge post footing is. Whitney’s sandy soil lets concrete footings sink and lean, especially when the original footer is shallow. Straightening the panel buys you a few weeks. Re-setting the post in a deeper footing, 36 inches minimum, is the real fix. Call (775) 307-6571 and we’ll check the footing before touching the panel.
Yes, if it’s sized right. Solar openers work well on Whitney’s long driveways where running grid power means trenching hundreds of feet through caliche. The panel has to match the operator’s duty cycle and the gate’s weight, and the battery needs a shade-corrected mounting to survive summer heat. We’ve installed solar kits on 16-foot steel gates off Sunset Road and they hold charge through the season. Call (775) 307-6571 for a site check.
Usually the track is fine, but the rollers are packed with grit. Flash flood runoff from the washes carries fine sand that gets into the roller bearings and between the rack and drive gear. Cleaning the track and replacing the worn rollers fixes the grinding before the drive gear strips. Call (775) 307-6571 to have a technician inspect the track.
Yes. Any automatic gate operator in Whitney is required to have entrapment protection devices, including photocells at the leading and trailing edges and a reverse function on the motor. This matters more on long driveway gates where family, delivery vehicles, and animals pass through. We install and test full sensor arrays on every automatic gate repair we complete. Call (775) 307-6571 to schedule a safety inspection.
Usually not. Whitney’s rapid temperature drops can cause condensation inside the keypad housing, and the keypad’s circuit board reads the moisture as a stuck key. The opener itself is likely fine. Replacing the keypad with a sealed outdoor model solves it. Call (775) 307-6571 and we’ll test the keypad before replacing the opener.
Call Carver Gate Repair Henderson for Whitney Gate Service
If you’ve got a gate that drags, grinds, or won’t open, call (775) 307-6571. We answer the phone live, day or night, and we’ll schedule a technician who knows Whitney’s gates and Whitney’s soil. Every repair comes with a written price before work starts and a written one-year guarantee. Lonnie Burke and the crew at Carver Gate Repair Henderson are ready to get your gate working right.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Whitney since 2008.