Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Henderson, NV
Hinge and post repair in Henderson typically costs between $180 and $650, depending on whether we’re rebuilding a hinge, welding a post, or resetting a gate that’s sagged out of alignment. It’s the repair most homeowners don’t see coming until the gate drags across the driveway or refuses to latch. At Carver Gate Repair Henderson, we handle hinge and post work as a core part of our Gate Repair in Henderson service, with a written price in your hand before any work starts. Call us at (775) 307-6571 when the gate stops swinging square.
Henderson’s soil shifts. It’s caliche and clay in most neighborhoods, which expands and contracts through the desert heat cycles. That movement puts steady pressure on gate posts, and when a post leans even a quarter inch, the hinges bind, the gate sags, and the latch stops lining up. We see it in Green Valley, Anthem, MacDonald Ranch, and Seven Hills, usually on the south and west-facing exposures where afternoon heat is hardest. The fix isn’t always obvious from the driveway, but the symptoms are consistent.
Lonnie Burke has run gate repairs in this valley long enough to know that a hinge problem and a post problem usually travel together. Carver Gate Repair is part of the Garrison Partners family, operating to The Garrison Standard since 2008. That means every hinge and post repair gets a written guarantee good for a full year. If the gate sags again inside that window, we come back and fix it at no charge. No argument, no second invoice.
When You Need Hinge & Post Repair
Most hinge and post failures announce themselves gradually, then suddenly. The gate scrapes the concrete for a week or two, then one afternoon it won’t open at all. Here are the gate repair conditions we respond to most often in Henderson:
- The gate drags or scrapes the driveway. This is almost always a hinge or post issue. The top hinge pulls away from the post, or the post itself leans outward under the gate’s weight. In Henderson’s caliche soil, posts set in concrete can still shift over years of thermal cycling.
- The latch no longer lines up. When a post leans even slightly, the latch bolt misses the strike plate. You might force it for a while, but the misalignment gets worse as the post continues to move.
- Visible rust or cracking at the hinge welds. Henderson’s low humidity doesn’t stop rust entirely, especially on ornamental steel gates near irrigation lines or pool equipment. A cracked weld on a hinge is a structural failure waiting to happen.
- The gate sags visibly when open. A gate that sits a few inches lower when open than when closed has a hinge problem. The weight of the gate is pulling the hinge barrels apart, and the fix is shimming or replacing the hinge, not just adjusting the operator.
- Post wobble or cracking at the base. A post that moves when you push the gate is compromised at ground level. Concrete footings can crack, steel posts can corrode underground, and the fix is post replacement or re-setting, not tightening a few bolts.
If any of these describe what you’re seeing, call (775) 307-6571. A background-checked, uniformed technician will look at the gate, explain what’s actually wrong, and hand you a written price before any work begins.
Our Hinge & Post Repair Process
We don’t improvise on hinge and post work. The process follows The Garrison Code, which means an arrival window we honor, a diagnosis we explain in plain terms, and a price that doesn’t move once you approve it.
- Site inspection and measurement. We check the post for plumb, the hinges for wear and weld integrity, and the gate for sag. We also check the operator and limit switch if the gate is automated, because a hinge repair on a motorized gate sometimes exposes a secondary issue at the opener.
- Written diagnosis and price. Before any tool touches the gate, you get a written description of the problem and a fixed price for the repair. That price covers the full job, not an estimate that grows once the work starts.
- Removal and prep. If the post needs re-setting, we excavate the old footing, clean the base, and prepare the hole for new concrete. For hinge repairs, we remove the gate or support it in place depending on the condition of the existing hardware.
- Post re-setting or hinge replacement. We set the new post in concrete, squared and plumbed against the gate’s actual travel path, not just a level line. Hinges get replaced or rebuilt, using the right hardware for the gate’s weight and material. For motorized gates, we adjust the operator and limit switch so the travel arc matches the gate’s new geometry.
- Final check and site cleanup. The gate gets cycled open and closed several times, the latch is verified, and the operator is tested through a full open-close cycle. We remove any debris from the excavation and leave the site clean. Then we hand you the written guarantee, good for a full year.
Hinge & Post Repair Pricing in Henderson
Hinge and post repair pricing in Henderson breaks down by the scope of the work. What costs $180 on one gate costs $650 on another, and the difference is usually determined by whether we’re repairing hardware or resetting a post in concrete.
Here’s what we typically see across Henderson, from Anthem to Sun City:
- Hinge adjustment or shim: $180 – $275. This covers a gate that’s sagging because a hinge barrel has worn or a top hinge has pulled slightly. We realign, shim, and torque the hardware, and we replace the hinge pin if it’s worn.
- Single hinge replacement: $220 – $350. Includes removal of the old hinge, grinding the mount surface clean, and welding or bolting a new hinge to match the gate’s weight. We carry a range of barrel and strap hinges to match the original hardware.
- Weld repair at hinge point: $250 – $400. If the hinge bracket has cracked at the weld, we grind out the old material and rebuild the joint. For ornamental steel gates in Henderson, this is often the strongest repair when the post is still sound.
- Post re-setting in concrete: $350 – $550. We excavate the old footing, set the post plumb, and pour new concrete. The gate gets re-hung and the hinges realigned to the post’s new position. This is the fix when the post itself has moved.
- Full post replacement: $450 – $650. When the post is too corroded or damaged to re-set, we install a new steel post, set it in concrete, and transfer the hinges and gate. We match the post diameter and gate height so the repair doesn’t look like an afterthought.
Every one of these prices is a written quote, not a range that tightens once the job is open. The number on the quote is the number on the invoice. Estimates are free, so if you’re not sure whether you’re looking at a hinge problem or a post problem, call (775) 307-6571 and we’ll tell you what we see.
We don’t do “affordable” or “low cost” language. We do written prices, background-checked technicians, and a guarantee that’s actually in writing. If the repair fails inside the year, the second visit is free.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Henderson?
Hinge and post repair in Henderson generally runs from $180 to $650, depending on whether the repair is a hardware adjustment, a weld & rust repair, or a full post re-set in new concrete. The single biggest variable is whether the post has moved. If it has, the footing has to be excavated and re-poured, which adds labor and curing time. Call (775) 307-6571 for a written quote based on what we actually find at your gate. Estimates are free.
Can you fix a sagging gate without replacing the post?
Often, yes. If the post is still plumb and the hinge hardware is simply worn or stretched, a hinge replacement or shim correction solves the sag without touching the post. But if the post itself has leaned, no hinge adjustment will hold. The post has to be re-set or replaced. We’ll tell you which situation you have, and you’ll get a written price either way before any work starts.
How long does hinge and post repair take?
Most hinge replacements and lock repair jobs are done in one visit, usually two to four hours depending on the gate’s weight and the condition of the surrounding hardware. Post re-setting takes longer because the new concrete needs to cure before the gate is re-hung with full tension on the hinges. We’ll give you a clear timeline when we quote the job, and we’ll honor the arrival window.
Do you work on motorized gates with hinge problems?
Yes. A hinge or post problem on an automatic gate repair puts extra load on the operator, and we regularly see swing operators with LiftMaster, FAAC, BFT, and Linear systems showing wear because a gate has been binding against a bad hinge. We check the operator, the limit switch, and the travel path as part of the hinge repair, and we adjust everything so the gate runs smooth after the structural fix. Call (775) 307-6571 and we’ll assess the whole system, not just the hinge.
Is it cheaper to repair or replace a damaged gate post?
Repair is cheaper when the post is still structurally sound and only needs re-setting or weld reinforcement. Replacement is the better call when the post is corroded at the base or cracked through, because a repaired post that fails again costs more than starting fresh. In Henderson, where irrigation lines and soil salinity are common, we lean toward replacement when we see significant underground corrosion. We’ll show you what we’re seeing and give you a written price for the right fix, not the cheapest one.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson.