Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Henderson, NV
Gate lock repair in Henderson typically costs between $145 and $385, depending on the lock type and what has failed inside the mechanism. Most lock repairs on residential gates take under two hours, and Carver Gate Repair Henderson can often have a technician on-site the same day you call (775) 307-6571. We work on slide gate locks, swing gate locks, keypad-controlled locks, and magnetic locks across the valley, from Green Valley Ranch to Anthem and everywhere in between.
This page covers what we fix and how we price it. If you’re looking for broader gate work, our Gate Repair in Henderson page walks through the full range of services. For now, let’s talk specifically about the lock on your gate, because a gate off its track is annoying, but a gate that won’t lock is a different kind of problem entirely.
Carver Gate Repair Henderson is part of the Garrison Partners family, operating to The Garrison Standard since 2008. That means written prices before any work starts, background-checked and uniformed technicians, and a written guarantee on every repair, good for a full year. Lonnie Burke runs the Henderson operation, and the same standards apply here as they do at every Garrison location.
When You Need Lock Repair
Not every gate lock issue is obvious. Here’s what we hear most often from homeowners across Henderson:
- The key won’t turn or the keypad stopped responding. In Henderson’s dry heat, internal lock components seize up faster than you’d expect. Dust works into the cylinder, lubricants break down, and suddenly the code or key that worked last week does nothing. This is usually a lock body or actuator failure, not a keypad problem, and it’s repairable in most cases.
- The gate closes but doesn’t actually latch or lock. You hear the motor stop, but the lock bolt never throws. That’s a lock alignment issue or a failed solenoid. On lift systems like LiftMaster or FAAC setups, the lock and motor have to sequence correctly. When they don’t, the gate sits there looking closed but unlocked.
- The magnetic lock hums but doesn’t hold. Maglocks on Henderson properties deal with high UV exposure and summer temperatures above 110°F. The magnet surface oxidizes, the armature plate shifts, or the power supply degrades. The result: the gate opens with a firm push, which defeats the entire point of the maglock.
- The manual release is damaged or someone forced the gate. Forced entry attempts, or just years of use, bend the lock strike and damage internal pins. In neighborhoods like MacDonald Ranch or Seven Hills, we see this frequently on older ornamental steel gates where the original lock was never upgraded.
- You lost keys, or a tenant/contractor moved out. Rekeying a gate lock, or replacing it entirely, is straightforward for us. We can rekey most residential gate locks on-site, and we recommend doing this any time a key is unaccounted for in Henderson.
If any of these sound familiar, call (775) 307-6571 and describe what the lock is doing. We’ll give you an honest read over the phone about whether it sounds repairable or if replacement makes more sense.
Our Lock Repair Process
We work to The Garrison Standard, which is the same process every Garrison Partners location follows, including the Henderson team. It keeps the work consistent and the price predictable. Here’s what happens when you call:
- You call and speak to a live person. Phone coverage runs 24/7, including weekends and holidays. No voicemail trees. We ask about your gate type, the lock, and the symptoms you’re seeing. That helps us dispatch the right technician with the right parts.
- We give you an arrival window. The technician shows up in a marked vehicle, in uniform, with a background check already on file. You know who’s at your gate before you open the door.
- The technician diagnoses the lock on-site. We inspect the lock body, the strike, the wiring or keypad if applicable, and the gate’s overall alignment. On LiftMaster, FAAC, BFT, or Linear systems, we test the lock’s interaction with the motor controls, because a lock that “fails” is often misreading a limit switch or loop detector signal.
- You get a written price before work starts. This is non-negotiable. The number we quote is the number on the invoice. If the scope changes, we stop and re-quote before touching anything else. No surprises at the door.
- We complete the repair and test it through multiple cycles. We open and close the gate repeatedly, run the lock through key, keypad, and remote activation, and confirm the locking sequence works with the motor. Then we clean up the work area before we leave.
- You receive the 365-Day Done Right Promise in writing. Every repair is covered for a full year. If the lock fails inside the guarantee period, we come back and make it right at no charge. That’s the promise, in writing, every time.
Lock Repair Pricing in Henderson
What you’ll pay depends on the lock type, the damage inside, and whether the lock is tied into a motor control board or just a mechanical key. Here’s a straightforward breakdown of what Henderson homeowners typically see:
- Mechanical gate lock repair or rekey: $145 – $225. This covers slide gate and swing gate locks that operate with a key only, no electronics. Rekeying usually lands at the lower end.
- Keypad or electronic deadbolt lock repair: $185 – $320. This includes troubleshooting the keypad, the control wiring, and the lock actuator. If the keypad itself needs replacement, that’s an additional part cost, quoted in writing before we proceed.
- Magnetic lock (maglock) service: $210 – $385. This covers armature plate realignment, power supply testing, and magnet replacement when the holding force has dropped. Maglocks fail gradually in Henderson’s heat, and by the time you notice, the magnet usually needs replacement rather than adjustment.
- Lock replacement (full unit): $230 – $480 depending on the lock type and gate construction. Ornamental iron gates in older Henderson neighborhoods often need custom-fitted strikes, which we handle on-site.
What’s included in every price: the diagnosis, the labor, the parts we replace, and the full-year written guarantee. What’s not included: anything we didn’t quote. Every job gets a written price first, and that’s the price, period.
Call (775) 307-6571 for a free phone estimate. We can give you a realistic range before we even send a truck, and the on-site quote confirms it in writing.
FAQs – Lock Repair
How much does gate lock repair cost in Henderson?
Most Electric Gate Repair and standard gate lock repairs in Henderson run between $145 and $385, with full lock replacements reaching about $480 on the high end. The range depends on whether the lock is mechanical or electronic, and whether the failure is in the lock itself or in the control wiring. Call (775) 307-6571 for a free estimate and we’ll give you a written price before any work begins.
Can you fix a gate lock the same day?
Yes, in most cases we can have a technician to your Henderson property the same day, especially for lock failures that leave a gate unsecured. We keep common mechanical and electronic lock components on our trucks, and our phones are answered by a live person 24/7. Call (775) 307-6571 and we’ll give you a straight answer on timing.
Is it cheaper to repair or replace a gate lock?
Repair is almost always cheaper when the lock body is intact and the failure is in the actuator, wiring, or alignment. A rekey or actuator repair runs $145 to $250. Weld & Rust Repair aside, replacement makes more sense when the lock body is corroded, the cylinder is damaged beyond rekeying, or you want to upgrade from a keyed lock to a keypad or maglock setup. We’ll show you both options in writing and let you decide.
Why does my gate lock work sometimes and not others?
Intermittent gate lock failures in Henderson are usually caused by heat-related expansion, a failing limit switch, or a loose wire connection at the control board. When the temperature swings from cold mornings to triple-digit afternoons, metal components shift microscopically, and a misaligned lock bolt will catch sometimes and miss other times. We’ll test the full open-close-lock sequence on your gate, isolate the variable, and repair only what’s actually failing. Call (775) 307-6571 for a free phone diagnosis.
Do you work on locks tied to gate motors?
Yes, we work on Automatic Gate Repair locks integrated with LiftMaster, FAAC, BFT, and Linear gate operators. These systems require the lock and motor to communicate through the control board, and when the sequence is off, the gate won’t lock even if the lock itself is fine. Our technicians are trained on all four brands, and we diagnose the full system, not just the lock in isolation.
Get Your Henderson Gate Lock Fixed
A gate that won’t lock is an open invitation, and you shouldn’t have to wait days to get it addressed. Carver Gate Repair Henderson sends background-checked, uniformed technicians to every call, gives you a written price before any work starts, and backs every repair with the 365-Day Done Right Promise in writing.
Call (775) 307-6571 now for a free estimate. A live person answers, day or night, and we’ll get your gate locking the way it should.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson.