Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Henderson, NV | Carver Gate Repair Henderson
Gate Repair in Henderson for Ghost Controls typically runs $180 to $340 for common fixes like limit switch calibration or capacitor replacement, and most jobs are done in one visit. We’re an independent service provider, not a Ghost Controls authorized dealer, which means we tell you the truth about repair versus replace without a corporate script. What makes our work different here: we know how Henderson’s heat, clay soil, and strict HOAs affect these specific openers. Call (775) 307-6571 for a written quote before any work begins.
Why Henderson Residents Choose Us for Ghost Controls Service
Our techs have rebuilt and fine-tuned Ghost Controls opener systems across Henderson’s gated communities, from older single-arm swing kits to newer AXDP dual-gate setups. We know exactly how their hardware reacts to desert heat and HOA-driven retrofits. Lonnie Burke runs our crew, and he trained in welding and metal fabrication at Cerritos College before spending years doing gate and fence work across Southern California. He’s known around the trade for diagnosing opener problems without replacing parts that don’t need replacing, which tends to save homeowners a meaningful amount of money. We also prefer genuine Ghost Controls control boards and limit switch kits for reliable fit and troubleshooting, but we source sealed motor capacitors and heavy-duty torsion springs aftermarket when OEM lead times stretch beyond a week. You get a straight answer about parts, a background-checked uniformed tech, and a written guarantee on every repair, good for a full year.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Henderson
- Control board solder joints cracking from heat cycling. Henderson summers push well past 110°F on the gate’s surface, and the repeated expansion and contraction breaks the solder connections on Ghost Controls control boards. The opener starts responding intermittently to remotes or not at all. We reflow or replace the board and test it under load before we leave.
- Motor capacitors blowing during monsoon-season brownouts. When the power dips and surges in July and August, the run capacitor in a TSS1 or AXDP arm takes the hit first. The arm stops mid-swing or hums without moving. We replace the capacitor with a sealed unit rated for sustained heat, not the cheapest part on the shelf.
- Limit switches drifting out of calibration as clay soil shifts gate posts. Henderson’s expansive clay soils swell after winter rains and shrink through the dry months, which slowly moves gate posts out of square. Once the post moves even a half inch, the Ghost Controls limit switch no longer matches the gate’s true travel, so the gate slams, stops short, or reverses mid-cycle. We recalibrate the switch and often re-shim the hinge side to buy years before the post needs resetting.
- Plastic gear teeth stripping under high-torque demands. A Ghost Controls swing opener like the RSP1 uses a plastic gearset inside the actuator. When an iron gate binds on a warped frame or hinges that Henderson’s heat has dried out, the motor applies more torque than those gears can take. The result is a grinding sound and a dead arm. We replace the gearset and then fix what caused the bind in the first place, instead of just swapping the part and walking away.
- Battery drain in the AXDP during summer. The AXDP dual-gate kit runs on battery backup, and Henderson’s sustained 100°F-plus nights cook those batteries well below their rated lifespan. If your opener kills a fresh battery in a couple of months, the board’s charging circuit is usually overcharging or undercharging. We test the charge voltage, replace the board if the regulator is bad, and flush the battery housing so dust doesn’t hold heat against the cells.
Ghost Controls Service in Henderson: What Local Conditions Mean for Your Equipment
Henderson’s strict HOA design review boards in MacDonald Highlands require that any Ghost Controls operator be painted to match the exact stucco color of the home’s fascia. That’s not a suggestion, it’s a covenant, and a mismatched motor housing can get the homeowner a violation notice. So we keep a cross-reference of Benjamin Moore and Dunn-Edwards HOA palettes in each service van. When we mount a new TSS1 or AXDP on a MacDonald Highlands home through our Gate Installation in Henderson, we paint the arm, the control box, and the mounting bracket before we leave, so the install passes review on the first inspection. Ghost Controls only ships their operators in a neutral gray or black powder coat, which works on a lot of Henderson homes but not all of them. The paint-match step takes a little extra time and it saves the homeowner a second visit and a letter from the design committee.
Beyond the HOA issue, there’s a mechanical one. Henderson’s rapid expansion of master-planned communities means most driveways we work on were built in two waves: the 1990s stucco tracts and the 2010s luxury subdivisions. Both waves use a lot of wrought iron and steel, and both are dealing with the same expansive clay under the posts. A Ghost Controls opener mounted on a gate whose post has shifted an inch in ten years is always going to fight itself. Our approach is to fix the mechanical alignment first, then calibrate the opener to the gate’s actual travel, not the travel it had when it was new.
Ghost Controls Models & Products We Service in Henderson
We service the full Ghost Controls residential lineup: the AXDP dual gate opener kit, the TSS1 single swing gate opener, the DSL1 sliding gate opener, and the RSP1 residential swing opener. We keep common control boards, limit switch kits, and sealed capacitors in the van for same-day swaps on the most common failures. For boards and complex parts, we can usually have OEM units in hand within a few business days through our local Henderson suppliers. If you’re running an older TSS1 or RSP1 and the board, arm, and battery are all failing at once, we’ll give you a blunt repair-versus-replace comparison. A new AXDP is often cheaper than three separate repairs on a ten-year-old opener, and we’ll put the numbers in writing so you can decide without pressure.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Henderson
Service calls in Henderson start at $89, and after we diagnose the problem you get a written price before we turn a single wrench. Common repairs:
- Limit switch calibration: $120 to $180
- Capacitor replacement: $140 to $220
- Control board replacement (OEM Ghost Controls): $260 to $380
- Gearset replacement in actuator: $180 to $260
- Full AXDP opener installation: $1,600 to $2,400, including paint-match and programming
- Battery replacement for AXDP dual-gate: $90 to $160 per battery
The price you see is the price you pay. Call (775) 307-6571 for a free estimate. We’ll tell you over the phone whether the problem sounds like a calibration issue, a dead board, or something else entirely.
Serving Henderson, NV - Our Local Coverage Area
We’re based in the Henderson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Henderson
Why does my Ghost Controls opener kill batteries every Henderson summer?
Heat is the culprit. Sustained 100°F-plus temperatures across Henderson accelerate the internal discharge rate of the AXDP’s backup batteries, and if the charging circuit is even slightly out of spec, the battery never fully recovers between cycles. We test the charger’s voltage output and replace the board if it’s overcharging, but in many cases the fix is simply switching to a heat-rated battery and relocating the housing to get better airflow. Call (775) 307-6571 and we’ll run the test.
Can you install a Ghost Controls opener on my custom iron gate without voiding my HOA approval?
Yes, provided the operator is painted to match the HOA’s approved color from the start. In MacDonald Highlands that means matching the home’s fascia stucco color, which we do with a cross-reference of the exact palettes the design boards use. We also hide the control wiring as close to the frame as the gate design allows. If your HOA has a written spec, we’ll install exactly to that spec and photograph it for your records.
My Ghost Controls remote works only 5 feet away now. Is the board failing?
Not usually. The receiver on a Ghost Controls board is a bare circuit trace that gets oxidized by Henderson’s fine dust and monsoon humidity, which reduces its effective range to a few feet. Before condemning the board, we clean the receiver traces, check the antenna length, and test the remote’s battery. If that doesn’t restore the range, then the board is the next part to suspect. A full board replacement runs $260 to $380 on most models.
Do Ghost Controls openers have a thermal shutdown that activates in 110°F heat?
Yes. Ghost Controls boards include a thermal cutoff that kills the motor circuit when the board temperature passes roughly 160°F. On a 110-degree Henderson day with direct sun on a black control box, that threshold gets hit faster than most people expect. The opener just stops, with no error light. If your gate dies on hot afternoons and works fine at night, we can relocate the control box to a shaded position, add a ventilated enclosure, or both. Call (775) 307-6571 for an exact quote.
What’s the fastest way to fix a Ghost Controls gate that won’t close all the way after monsoon rain?
Check the limit switch first. After Henderson’s monsoon season, wet clay expands and shifts gate posts just enough to throw the Ghost Controls limit switch out of sync, so the gate thinks it’s reached full travel before it has actually latched. We recalibrate the switch to the gate’s new position and check for any rubbing along the frame. If the post shift is significant, we’ll recommend resetting the post before it gets worse. Recalibration runs $120 to $180. Call (775) 307-6571 and we’ll be out the same day.
Service Areas Near Henderson
Our Henderson crews work throughout the city, including Green Valley and Whitney, and also cover Ghost Controls service in Enterprise and Ghost Controls service in Spring Valley. If you’re in a gated community near Nellis AFB or further east, we can usually route a tech to you the same day. We also keep this page’s Ghost Controls sales & service information updated for the full model range.
For everything else we do across the valley, see our Henderson service area page.
Book Your Ghost Controls Service in Henderson Today
Call (775) 307-6571 for a free estimate on Ghost Controls gate repair anywhere in Henderson. A live person answers, day or night. We’ll give you a written price before work starts, and the work carries our 365-Day Done Right Promise. If a repair fails inside the guarantee window, we come back free and fix it. Tell me what it’s doing wrong, and I’ll tell you what it needs, usually those are two different things.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson since 2008.