Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Henderson, NV
Gate realignment in Henderson typically costs between $150 and $350 for a standard single swing gate, with most jobs completed in under two hours. A gate that drags, won’t latch, or has a visible sag is usually showing hinge wear, shifting concrete, or post movement, and the fix often comes down to repositioning the gate and tightening or replacing the hardware. Our crew at Carver Gate Repair Henderson handles realignment work across the valley, from Green Valley Ranch to Anthem to Inspirada, and every job starts with a written price before we touch a tool. If your gate is fighting you every time you open or close it, call us at (775) 307-6571 and we’ll get it swinging true again.
Realignment is one of the most common calls we take under the broader Gate Repair umbrella. It’s the kind of fix that sounds minor until you’re wrestling a 300-pound gate off the ground every morning. We do the work the same way we do every Gate Repair in Henderson job: arrive on time, diagnose in front of you, hand you a written price, and leave the gate operating like it should.
When You Need Gate Realignment
Most homeowners don’t think about gate realignment until the gate starts talking back. Here’s what typically brings Henderson residents to the phone:
- The gate drags across the driveway or walkway. You’ll see scrape marks in the concrete or pavers. This is the gate’s weight pressing down because the hinge side has settled or the gate frame has twisted.
- The latch no longer lines up with the post. You have to lift, shove, or kick the gate to get it to close. In Green Valley, we see this often on iron gates where the post has shifted slightly with the soil’s natural expansion cycles.
- The gate swings open or closed on its own. That means the gate is out of level and gravity is doing the work. It’s a safety issue, especially in wind-prone areas near the foothills.
- Visible sag at the free end. Stand back and look at the top rail. If it slopes down as it moves away from the hinge post, the gate has dropped. On taller steel gates in Anthem, the added surface area catches wind and accelerates the problem.
- You hear grinding or scraping while the gate moves. The gate is dragging against the frame or the hinge pin is binding. It’ll only get worse, and it’s wearing out hardware that costs more to replace than realigning costs to fix.
- The gate motor is straining. If you have a swing gate opener from a brand like LiftMaster or FAAC, a misaligned gate forces the motor to work harder. Early realignment keeps a $200 repair from becoming a $900 operator replacement.
These symptoms also matter for safety. A gate that’s fighting its hardware can fail suddenly, and a swinging, out-of-balance gate is a genuine hazard. We tell every homeowner the same thing: if the gate isn’t moving smoothly, don’t force it. Call us at (775) 307-6571 and we’ll take a look.
Our Gate Realignment Process
We’ve been doing this work under The Garrison Standard since 2008, and realignment follows the same discipline as every other job we take. Here’s exactly what happens when you call Carver Gate Repair Henderson:
- You call and a live person answers. Not a voicemail box, not a call-back queue. You’ll talk to someone on our team at (775) 307-6571 who can schedule a time that works for you.
- We arrive and assess the gate with you. Our technician checks the hinges, post plumb, gate level, and latch alignment. We measure the sag, check for concrete movement, and look at how the gate sits in its frame.
- You get a written price before any work starts. This is non-negotiable for us. The number you sign off on is the number you pay. If we find something else while working, you approve any change before we proceed.
- We realign the gate. Depending on the issue, this may mean adjusting or replacing hinges, resetting the post, shimming the frame, or adjusting the operator’s travel limits. If the motor is part of the problem, our techs are trained on LiftMaster, FAAC, BFT, and Linear systems, so we address the motor as part of the same visit.
- We test the gate through full open and close cycles. The gate should move smoothly, latch without force, and sit level. If an opener is installed, we confirm the limit switches are set so the motor isn’t overworking.
- You get a written guarantee. Every realignment we do carries our 365-Day Done Right Promise. If it’s not done right within a full year, we come back and make it right. No charge, no argument.
We leave the site clean, the gate moving correctly, and you with the paperwork in hand. That’s The Garrison Code: written prices, background-checked technicians, and work that holds up.
Gate Realignment Pricing in Henderson
Realignment is one of the more straightforward gate repairs, and the price usually lands in a predictable range. Here’s what Henderson homeowners can expect:
- Standard single swing gate realignment: $150 – $250. This covers hinge adjustment, latch alignment, and lubricating moving parts. Takes about an hour to ninety minutes.
- Single swing gate with hinge replacement: $220 – $350. When the hinges are worn or bent, we replace them with properly rated hardware and realign the gate at the same time.
- Double gate realignment (both leaves): $250 – $450. Both gates get checked for level, sag, and latch alignment, and we adjust both so they meet correctly in the middle.
- Realignment with post reset: $350 – $600. If the post has shifted and needs to be re-set in new concrete, the job takes longer and requires letting the concrete cure properly.
- Sliding gate realignment: $200 – $400. Sliding gates ride on rollers and track, and misalignment means the gate binds or comes off the track. We reset the track, adjust rollers, and confirm the motor’s travel limits are correct.
What changes the price? The size and weight of the gate matter. A wrought iron drive gate in Seven Hills weighs more and takes longer than a small walk gate. The condition of the hardware matters too. If everything’s reusable, the price stays low. If hinges are shot or the post has pulled loose, that’s more work and more material. We don’t bury these costs, we show them to you before we start.
Every realignment quote we give is free. Call (775) 307-6571, describe what the gate is doing, and we’ll give you an honest range over the phone. The written price comes before any work begins, so there’s no guessing at the door.
FAQs – Gate Realignment
How much does gate realignment cost in Henderson?
Gate realignment in Henderson usually costs $150 to $350 for a standard single swing gate, with double gates and sliding gates running higher depending on what needs adjusting or replacing. The written quote you get before work starts is the price you pay. Call (775) 307-6571 for a free phone estimate and we’ll give you a range based on what you’re describing.
Can you realign my gate the same day I call?
In most cases, yes. Because our phones are answered by a live person 24/7, we can often schedule same-day or next-day visit for gate realignment in Henderson. Realignment is a contained job that usually doesn’t require parts, so same-day service is something we can frequently offer. Call (775) 307-6571 and tell us what the gate is doing, and we’ll get you on the schedule.
Is it cheaper to realign or replace my gate?
Realignment is almost always cheaper than replacement, typically costing $150 to $350 compared to $1,500 to $4,000 or more for a new gate and installation. If the gate is structurally sound and only dropped or shifted, realignment gets it working again for a fraction of the cost. We’ll tell you honestly if the gate has reached the point where replacement makes more sense.
Will gate realignment fix my gate opener problem too?
Often it will, because a misaligned gate forces the motor to work against extra resistance, which triggers limit-switch errors and safety reversals. Our techs work on LiftMaster, FAAC, BFT, and Linear operators, so we adjust the gate and the motor in the same visit. If the motor itself is failing, we’ll show you what’s happening and give you a written price for the repair before we do anything.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson.
If your gate is dragging, sagging, or refusing to latch, call Carver Gate Repair Henderson at (775) 307-6571 today. You’ll get a live person, a straight answer, and a written price before any work starts. Our realignment work is covered by the 365-Day Done Right Promise, so if it’s not done right within a full year, we come back on our own dime. That’s the deal we put in writing on every job. Home