Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Repair Near You in Henderson, NV
Gate repair in Henderson typically runs between $145 and $420 for most mechanical fixes, and our technicians reach most Henderson addresses within 90 minutes. If your gate won’t open, sags on its hinges, or makes a grinding sound when the motor runs, call us at (775) 307-6571 and a live person will answer. We serve Henderson, Green Valley, Anthem, and the surrounding neighborhoods with written pricing before any work begins.
Key Takeaways
- Most Henderson gate repairs are completed same-day, often within 90 minutes of your call.
- Every repair carries a written guarantee, good for a full year from the date of service.
- You get a written price before work starts. That number does not move.
- We dispatch background-checked, uniformed technicians trained on nine gate-motor brands.
- Phones are answered by a live person 24 hours a day, including weekends and holidays.
Fast, Local Gate Repair
We run our Gate Repair services in Henderson the way we would want them run at our own homes: show up when we say we will, explain the problem in plain English, and leave the site cleaner than we found it. Our techs carry the common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so most repairs are finished on the first visit. When a swing gate operator fails on a Sunday evening in Green Valley, you don’t have time to wait through a voicemail queue. Our phone line is staffed around the clock, and whoever answers can dispatch a technician to your address.
Henderson’s desert climate works against gate hardware in specific ways. The combination of fine dust, extreme summer heat, and wide overnight temperature swings causes limit switches to drift, capacitors to fail, and nylon gear teeth to strip faster than they would in a coastal market. In Anthem and MacDonald Ranch, we regularly see Photoelectric sensor misalignment from wind-shifted gates and cracked weld joints on steel driveway gates that flexed during the seasonal monsoon storms, which is why we offer Weld & Rust Repair. These are not generic gate problems. They are Henderson gate problems, and they require a tech who has seen them hundreds of times, not a generalist contractor squeezing a gate call between two other jobs.
Every technician dispatched in Henderson works to The Garrison Code, which means three things on every single call: a written price before we touch a tool, a background-checked tech in uniform at your door, and a written guarantee on the repair itself. We’ve operated to The Garrison Standard since 2008, and the standard has not softened since.
Read more about how we approach full-service work on our Gate Repair in Henderson page.
How Much Does Gate Repair Cost in Henderson?
Most Hinge & Post Repair and other gate repairs in the Henderson area land between $145 and $420. The price depends on what failed and what brand of operator or hardware is on the gate. Below are the ranges we typically see in Henderson, Enterprise, and Spring Valley, based on the work our technicians completed in those neighborhoods.
| Repair Type | Typical Cost in Henderson |
|---|---|
| Limit switch replacement or adjustment | $145 – $225 |
| Hinge replacement (weld-on or bolt-on) | $180 – $340 |
| Gate motor capacitor replacement | $165 – $260 |
| Loop detector replacement | $210 – $375 |
| Swing operator arm replacement | $260 – $480 |
| Full gate motor replacement (parts and labor) | $650 – $1,400 |
These are real numbers from our Henderson service area, not national averages from a pricing database. If your gate problem isn’t listed here, call (775) 307-6571 and we will give you a written price after diagnosing the issue on-site. The diagnosis and estimate are free.
What to Check Before You Call
You don’t need to be a technician to narrow down what’s wrong. Walking through these three questions helps our dispatcher send the right tech and the right parts on the first trip.
- Does the gate have power? Check whether the keypad or receiver lights up. If nothing lights up and the breaker isn’t tripped, the issue is often a bad control board or transformer. If the lights are on but the motor won’t turn, the problem is usually mechanical: a stripped gear, a seized bearing, or a failed capacitor.
- Does the gate move at all? A gate that moves a few inches and reverses is often a limit switch or obstruction-sensor problem. A gate that moves slowly or makes a grinding sound usually points to a failing capacitor or worn gear. These distinctions matter because they determine which parts we bring.
- Is the gate manually hard to move? Disengage the operator using the manual release (usually a pull handle or key on the side of the motor) and try moving the gate by hand. If the gate is heavy to push or won’t move smoothly on its track or hinges, you have a mechanical failure, not an electrical one. That changes the repair scope and the parts involved.
Safety note: if your gate involves high-tension springs or a counterbalance system, do not attempt to adjust or remove those springs yourself. They store enough energy to cause serious injury. Leave spring work to a trained professional with the right tension-checking tools.
Our Technicians Work on These Gate Motor Brands
Henderson neighborhoods were built across decades, which means the gate motor on an older home in Green Valley is often a completely different brand than what a builder installed in Anthem last year. That’s why we stock parts and carry training on nine systems: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A technician who only knows LiftMaster cannot properly diagnose a FAAC hydraulic operator, and a homeowner pays for that gap in wrong parts and repeat visits. Our techs match the repair to the system on your fence, and if your issue involves a lock mechanism, we also provide Lock Repair, not just the system they are most comfortable with.
Areas We Cover
Our technicians dispatch across the entire Henderson valley every day. That includes Green Valley, Anthem, MacDonald Ranch, Whitney Ranch, and Seven Hills on the Henderson side, plus Enterprise and Spring Valley to the west, and Paradise and the Nellis AFB corridor to the north. If you are within a 30-minute drive of the Henderson center, we are almost certainly in your area. Call and the person who answers will confirm which tech is nearest to you.
Our Gate Repair Process
- Call us at (775) 307-6571. A live person answers, day or night. Tell them what the gate is doing, what brand the motor is if you know it, and which neighborhood you’re in.
- Get a dispatch window. We tell you when the tech will arrive. That window holds. The tech arrives in a Carver-marked vehicle wearing a uniform and a visible ID badge.
- Receive a written price. The tech diagnoses the problem and writes out the repair cost before any work starts. If you decide not to proceed, you owe nothing. If you approve it, work begins immediately.
- Get the repair done and verified. The tech tests the gate through multiple open and close cycles, checks the operator’s force settings and limit adjustments, and walks you through what was repaired.
- Walk away with a written guarantee. Every repair is covered by the 365-Day Done Right Promise. If the repair fails within one year, we come back for free. No charge, no argument.
Frequently Asked Questions
How fast can you get to my gate in Henderson?
Most Henderson addresses see a technician within 90 minutes of the call. Same-day service is standard for calls received before mid-afternoon, and emergency calls are dispatched around the clock. If you’re in Green Valley, Anthem, or Whitney Ranch, your wait is typically on the shorter end because our techs are already working those neighborhoods daily.
Do you serve my area near Henderson?
We serve Henderson plus the surrounding communities of Enterprise, Spring Valley, Paradise, and the Nellis AFB area. If you’re within about a 30-minute drive of central Henderson, we cover you. Call (775) 307-6571 and tell the person who answers which cross streets you’re near. They’ll confirm coverage and give you a straight answer on timing.
How much does gate repair cost in Henderson?
Most repairs in the Henderson area cost between $145 and $420 for mechanical and electrical fixes, with full gate motor replacement running $650 to $1,400 depending on the brand and horsepower. The exact price is written down before we start, and that written number does not change. Call (775) 307-6571 for a free on-site estimate.
Can you repair my gate after hours or on weekends?
Yes. Gates fail at inconvenient hours, and a gate stuck open at 11 PM is a security problem, not something that can wait for Monday. Our phones are answered by a live person 24 hours a day, 365 days a year, and we dispatch emergency calls on nights, weekends, and holidays. When you call, you’ll speak to someone who can send a technician, not a recording that asks you to leave a message.
Is it cheaper to repair or replace my gate motor?
If your motor is under ten years old and the failure is a capacitor, limit switch, or minor board issue, repair is nearly always cheaper, typically $145 to $375. If the motor is over 12 years old, or if it has a stripped gearbox and a burned control board simultaneously, replacement at $650 to $1,400 is often the better long-term spend, especially since our replacement work carries the same one-year written guarantee. The tech will show you the math on both options before you decide.
What does your guarantee cover?
The 365-Day Done Right Promise covers every repair we make for a full year from the date of service. If the same component fails again within that year, we return and fix it for free. The guarantee is in writing on every job. There is no fine print about “normal wear” or exclusions for certain brands. If we repaired it and it failed, we make it right.
Call Carver Gate Repair Henderson
If you’re searching for gate repair near you and you live anywhere in the Henderson valley, you can stop searching. Call (775) 307-6571 now and you’ll reach a live person who can dispatch a background-checked, uniformed technician to your address. You’ll get a written price before work begins, a repair covered by a one-year written guarantee, and a site left clean when the job is done. That’s The Garrison Standard, and it has been since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson and nearby areas.
What Our Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.