Gate Repair Cost - What It Actually Costs, Quoted Free

Wrought iron

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Farm & ranch03Sliding driveway gates04LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Repair Cost in Henderson?

Gate Repair in Henderson typically runs between $175 and $950 for most common fixes, with gate motor replacement landing between $650 and $1,800 depending on the operator brand and swing or slide configuration. A simple limit switch adjustment or hinge repair on a residential swing gate usually stays under $250, while a full operator swap on a heavier slide gate with new safety sensors can push past $1,600. These numbers reflect what we see across Henderson neighborhoods like Green Valley, Anthem, MacDonald Highlands, and Inspirada throughout 2025 and into 2026.

If you want a written price for your specific gate before any work starts, call (775) 307-6571. Estimates are free, and the number you get is the number you pay.

Key Takeaways

• Most Henderson gate repairs cost $175 to $950; motor replacements run $650 to $1,800.
• Labor rates in the Las Vegas Valley are competitive, but Henderson’s mix of custom iron gates in communities like Anthem and Lake Las Vegas drives replacement-part costs higher than national averages.
• The biggest cost variable is the gate operator: LiftMaster and Ghost Controls residential units cost less than Viking or DoorKing commercial-grade operators.
• Every repair from Carver Gate Repair Henderson includes a written price before work starts and a full-year written guarantee.
• We answer the phone live, 24/7 at (775) 307-6571 – no voicemail trap.

Gate Repair Cost Breakdown (2026)

Here is what homeowners and property managers in Henderson can expect to pay for common gate repairs in 2026. These ranges reflect our actual job history across the valley, adjusted for the parts and equipment common to this market.

These are real working numbers for this market, not national averages. Henderson’s mix of residential communities and gated HOAs means we see a higher percentage of slide gates and dual-swing systems than most cities of similar size. Slide gate hardware costs more than swing gate hardware, period. A broken V-wheel on a 700-pound slide gate in Green Valley Ranch is not the same job as a loose hinge on a 90-pound ornamental gate in Whitney Ranch.

What drives the price up

• Operator brand and age. Viking and DoorKing operators are built for commercial duty and their parts carry commercial pricing. A replacement Viking control board can cost $500 to $900 in parts alone before labor. A Ghost Controls or Mighty Mule residential board might run $120 to $250.
• Gate weight and length. A 16-foot heavy iron slide gate needs a larger operator and more precise travel adjustments than an 8-foot walk gate. Labor time goes up accordingly.
• Access and site conditions. Some Henderson properties sit on sloped lots with limited clearance around the gate track. Retaining walls, decorative stone, and mature landscaping can add time to what would otherwise be a straightforward part swap.
• HOA compliance requirements. Communities like Anthem Country Club, Seven Hills, and Lake Las Vegas often require specific equipment or finishes. Matching existing hardware matters, and specialty finishes cost more than standard powder coat black.

What drives the price down

• Early intervention. A gate that’s slightly out of alignment and making noise is often a $200 fix. That same gate left to grind for six months can chew through rollers, bend the track, and kill the motor. We call this the difference between a repair and a replacement, and Henderson homeowners see it constantly.
• Regular preventive service. A yearly inspection and tune-up catches limit switch drift, sensor misalignment, and worn rollers before they cascade. Most preventive visits land between $150 and $225.

What Affects Gate Repair Pricing in Henderson

Price is not random. Here are the six variables that move a Henderson gate repair quote most, in order of impact.

• 1. Type of operator. Swing operator, slide operator, or hydraulic ram? Hydraulic systems on estate gates in MacDonald Highlands or Roma Hills cost more to service than the chain-drive slide operators common in newer Inspirada builds. The parts are different, and so is the labor.
• 2. Parts availability. LiftMaster and Linear parts are easy to source locally, which keeps cost and turnaround tight. Some FAAC and BFT components ship from distributor warehouses and can add a day or two to a job that needs a specific circuit board. We carry common boards and sensors on our trucks, but no technician stocks everything for all nine brands we service.
• 3. Gate material and weight. Wrought iron, steel tube, aluminum, or solid wood? A heavy ornamental iron gate with glass inserts in Lake Las Vegas demands more care and often more time than a lightweight aluminum tube gate in a standard subdivision. Weight is the real cost driver, not the material itself.
• 4. Sun, heat, and dust. Henderson summers run hot and dry, and the dust is relentless. We routinely see sun-degraded plastic gears, brittle wire insulation, and dust-packed limit switches that would not fail this way in other climates. The UV exposure ages plastic housing and photocell lenses faster than it does in milder markets. Some repairs require replacing sun-damaged components that a gate in another region would never need replaced.
• 5. Electrical and safety compliance. Clark County follows the National Electrical Code, and gate operators require specific electrical clearances and conduit runs. If a previous installer skipped proper grounding or used undersized wire, correcting it adds labor and materials to the job. We will not leave a gate that does not meet code, and that sometimes means the job takes longer than the customer expected.
• 6. Emergency response timing. A gate that will not close at 10 p.m. is a security problem, not a convenience problem. After-hours service in Henderson costs more than a scheduled weekday appointment, but less than most people expect. We dispatch night and weekend calls at standard overtime rates with no hidden trip charges.

Common Gate Problems and What They Cost in Henderson

Gate won’t open or close

This is the most common call we get in Henderson, and the cause splits evenly between control board failure, limit switch drift, and safety sensor misalignment. A sensor that’s been bumped by a trash can or a landscaper’s blower will stop the gate dead, and realigning it costs $145 to $200. A failed control board costs more: $280 to $700 for residential operators, and $400 to $900 for commercial boards on Viking or DoorKing units. If the motor itself is dead, replacement runs $650 to $1,800 depending on the operator.

Gate makes grinding or screeching noise

Noise is usually mechanical, not electrical. On slide gates, the V-wheels and guide rollers wear down and start grinding against the track. Henderson’s dust accelerates this wear. Wheel and roller replacement runs $160 to $400. On swing gates, hinge bushings wear out and the leaf sags, causing the gate to scrape. Hinge & Post Repair runs $150 to $350. If the operator’s internal gears are stripped, that’s a motor or gearbox replacement, not a simple adjustment.

Gate reverses before fully closing

This is a safety system doing its job. The operator detects resistance or a sensor interruption and reverses. Most of the time, the fix is a sensor alignment or a torque adjustment, which runs $145 to $300. If the gate’s rollers are binding, the repair cost climbs to $160 to $400 because the issue is mechanical, not electrical. Every one of our technicians is trained on the entrapment protection settings for all nine motor brands we service, including the current UL 325 requirements.

Remote or keypad stopped working

Battery replacement is a $25 fix you can do yourself. If the remote is programmed but the operator is not responding, the receiver or control board may have failed. Receiver replacement runs $150 to $325. A replacement keypad or Lock Repair runs $185 to $375 installed, and we program it on site. For HOAs and communities with multiple users, we recommend a system with programmable codes per household, and we can set that up during a routine service call in under an hour.

Repair vs. Replace: How to Decide in Henderson

The realistic threshold in this market is this: if the repair cost exceeds 50 percent of the installed price of a new motor and the existing unit is more than eight years old, replacement is the better call. Gate motors in the Henderson sun age faster than the national average, and most residential operators installed before 2017 are approaching the end of their service life, especially units exposed to full afternoon sun.

Swing operators last longer than slide operators here because they are often mounted under a pillar cap or behind a wall. Slide operators sit exposed on a pad, and the heat loading plus dust takes a measurable toll on capacitors and control boards. If you have a slide gate that’s been through three summers of direct sun and the motor is failing, we tell customers straight: do not sink $500 into a motor that needs a $1,100 replacement in eighteen months.

For the gate itself, repair almost always wins. Steel and iron gates in Henderson can last 20 to 30 years with hinge and roller maintenance. Replacing a gate structure is rarely necessary unless the metal is rusted through, which does happen in older pool-side properties where chlorinated water spray accelerates corrosion. For a full rundown on what’s involved in a gate service visit, see our Gate Repair in Henderson page.

How to Save on Gate Repair

Saving money on gate repair is about timing and information, not about finding a discount technician.

• Address problems early. That squeak, that intermittent reverse, that remote that only works from the driveway but not the street: fix them now. A $200 fix in month one beats a $1,100 replacement in month eighteen. We see this pattern constantly in Henderson, especially after summer when heat damage accumulates.
• Get a written price before work starts. Every Carver Gate Repair Henderson customer receives a written price before we begin. No verbal ranges that shift once the gate is open. The number on paper is the number you pay. If you are comparing quotes, ask every company whether their price is written and binding before the first tool comes out.
• Ask about the guarantee before you commit. Our guarantee is in writing and good for a full 365 days from the date of service. If the repair fails inside that window, we come back at no charge. No arguments, no dispatch fees, no fine print. That guarantee is part of The Garrison Standard, the operating code every Carver Gate Repair location follows.
• Do not DIY the operator. Gate motors have capacitors that store charge even when the unit is unplugged, and swing arms carry enough torque to break fingers. If the issue is batteries or a clean sensor lens, fine. If the issue is inside the operator housing, call a technician. The lesson we have learned from too many Henderson service calls: a $400 DIY attempt typically becomes an $800 professional repair with extra damage.
• Schedule a preventive service call. A $175 to $225 annual tune-up catches most failures before they happen. We check limit settings, torque, sensor alignment, battery backup function, and mechanical wear. For HOAs, we document everything so the community board has a record of gate condition.

Call (775) 307-6571 for a free estimate on any gate or motor issue. We answer live, 24/7.

What The Garrison Standard Means for Pricing

Carver Gate Repair Henderson is part of the Garrison Partners family, and we have operated to The Garrison Standard since 2008. That standard is not a marketing slogan. It is a written operating code, and every location is bound to it. Lonnie Burke leads the Henderson operation, and the rules he enforces are the same rules applied at every Carver Gate Repair location in the country.

What does that mean for your bill? Three things, specifically.

First, the written price. Every customer receives a written price before any work begins. If we find something unexpected once the gate is open, we stop, explain what we found, and provide an updated written price before continuing. You approve the work. The number never moves on its own.

Second, the written guarantee. Every repair includes a full-year guarantee, on paper, covering parts and labor. If the repair fails within 365 days, we fix it at no charge. That is a free second visit, not a pro-rated credit or a discounted return trip. It is the guarantee we would want if we were the ones paying for the repair.

Third, the people on your property. Every technician who rolls up to a Henderson gate is background-checked and uniformed. You know exactly who you are letting onto your property, and we know that matters more in gated communities and family neighborhoods than anywhere else. Our crews arrive with factory training on all nine motor brands we service: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We match the right parts and the right know-how to the system already on your gate, which means fewer wrong-part callbacks and fewer wasted days.

Henderson Gate Repair: Neighborhood Notes

Henderson gate work is not uniform. The neighborhoods shape the types of gates and the repairs we see.

In Green Valley and Green Valley Ranch, most gates are residential swing gates, often with Ghost Controls, Mighty Mule, or LiftMaster operators. The dominant repair calls here are hinge wear and sensor alignment. Homeowners in these neighborhoods tend to schedule service quickly, and the gates we see are in better shape for it.

In Anthem, Seven Hills, and MacDonald Highlands, gates run larger and heavier. Custom iron work is common, and dual-swing systems are frequent. Operators lean toward LiftMaster, FAAC, and occasionally Viking on estate properties. The repair calls here skew toward operator replacement and control board failure, because the gates weigh more and the operators work harder. These jobs run on the higher end of our posted ranges.

In Inspirada and newer subdivisions on the west side, slide gates are more common, often paired with Ghost Controls or Linear slide operators. The heat exposure on west-facing installations is severe, and we replace sun-damaged sensors and brittle wiring on these units more than anywhere else in the valley.

In Lake Las Vegas, the properties often have dual operators on heavy custom gates with water features and decorative stone surrounding the track area. Access can be tight, and matching finishes is a real factor in parts pricing. We carry or source powder-coated hardware in standard bronze, matte black, and sandstone finishes to match what is out there.

No matter the neighborhood, the call flow is the same: dial (775) 307-6571, talk to a live person, schedule a window that works, and get a written price before work begins. That is the simple version. The fuller version is the page we wrote on home gate service across the region, along with our dedicate Gate Repair in Henderson page.

FAQs – Gate Repair Cost

How much does a gate motor replacement cost in Henderson?

A residential gate motor replacement in Henderson runs $650 to $1,300 for swing operators and $800 to $1,800 for slide operators, including standard installation. Commercial-grade operators from Viking or DoorKing push the range higher. For an exact written price on your specific gate, call (775) 307-6571. Estimates are free.

Is it cheaper to repair or replace a gate motor?

If the motor is under five years old and the failure is limited to a capacitor, relay, or limit switch, repair is almost always cheaper, typically $125 to $400. If the motor is over eight years old and the gearbox or main board has failed, replacement usually makes more sense at $650 to $1,800. Henderson’s heat ages gate motors faster than the national average, so we apply that threshold honestly.

Can you fix a gate the same day in Henderson?

Most standard Gate Repair Near Me in Henderson, NV can be completed the same day, especially if the part is on our truck. Our technicians cover the entire Henderson service area, and we carry common LiftMaster, Linear, and Ghost Controls boards, sensors, and rollers. Call (775) 307-6571 to confirm availability. If the part is rare, we tell you upfront and schedule the return.

What is the average cost for a gate repair in Henderson?

The average gate repair cost in Henderson lands between $250 and $450 for most non-motor repairs. Motor replacement is a different category and runs $650 to $1,800. If you tell us the gate type, operator brand, and symptom, we can give you a realistic range over the phone before we ever roll a truck.

Do you charge for estimates?

No. Estimates are free. We come out, look at the gate, and hand you a written price before any work starts. If you approve, we fix it right then. If you want to think about it, the written price stays valid, and there is no charge for the visit. Call (775) 307-6571 to schedule.

What brands do you service?

We service nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate has a different operator installed by a previous contractor, call us anyway. If it is within our scope, we will tell you on the phone. If it is not, we will tell you that too, rather than show up and hand you a bill.

Call for a Free Henderson Gate Repair Estimate

If your gate is acting up, call (775) 307-6571. You will get a live person, not a recording. We will ask what the gate is doing, what operator it runs, and when it started. Then we will schedule a time that works for you and show up on time, in uniform, with a truck stocked for the most common Henderson gate repairs. You will get a written price before any work starts, and every repair carries a full-year written guarantee. That is the way Lonnie Burke runs this shop, and it is the way every Carver Gate Repair location operates.

Pricing reflects the Henderson market as of 2026. Carver Gate Repair Henderson offers free estimates – call (775) 307-6571.

Written by Lonnie Burke, Owner at Carver Gate Repair Henderson, serving Henderson since 2008.