Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Whitney, NV
Carver Gate Repair is the gate company Whitney homeowners call when a gate won’t open, won’t close, or won’t stay where it belongs. We handle gate repair, installation, and motor work across Whitney’s mix of mid-century ranch homes and post-1980s stucco subdivisions. The jobs here lean different than nearby Las Vegas proper: extreme heat, flash-flood grit, and shifting soils put real strain on hinges, welds, tracks, and opener motors. Every Whitney job gets a written price before work starts and a written one-year guarantee when it’s done. Call (775) 307-6571 and you’ll reach a live person, not a queue.
Why Whitney Homes Are Different
Whitney’s housing stock runs from 1960s ranch homes to early-2000s stucco subdivisions, and the gate work follows that mix. Older properties often carry lightweight chain-link or wooden gates on simple post hinges. Newer homes, set into stucco block walls, tend toward heavier steel or wrought-iron gates on sliding tracks or swing openers. That second group is where we see the most call volume in Whitney, and for a reason most homeowners don’t expect: many of those stucco block walls were built without weep holes, so after a heavy rain the block traps moisture behind the hinge plates, rusts the bolts, and the gate fails weeks or months later. It’s a Whitney pattern we see every monsoon season.
Climate is the other Whitney factor. Summer highs over 100°F and sharp overnight drops expand and contract metal repeatedly. Hinges loosen, welds fatigue, and steel gates settle out of square. Flash floods from nearby washes leave fine grit in bottom tracks, which grinds down rollers and forces opener motors to work harder than they were built to. The result is that Whitney gate failures are less about age and more about environment. A gate that worked fine in April can bind by August. Lonnie Burke, who runs our Whitney crew, says the same thing on most first visits: the gate is fine, the wall and the weather are not.
Styles & brands we work with
Our Main Whitney Services
Most Whitney calls fall into two categories: a gate that has failed outright, and a motor that is running but not properly. Here is what each job involves around here.
Gate Repair in Whitney
Whitney gate repairs usually come down to a handful of recurring failures: sagging steel or wood panels, hinge bolts snapped at the stucco wall, rusted track rollers, and bent slide tracks. We inspect the full assembly, find what moved or corroded, and fix it with parts matched to the gate’s weight and material. On welded steel gates showing heat fatigue, we cut out the bad section and reweld rather than bolting over it and hoping. Any repair we make is covered by our written one-year guarantee. Full details are on the Gate Repair in Whitney page.
Gate Installation in Whitney
A new gate in Whitney has to survive the same conditions that killed the last one, so our installs start with the anchors and the wall, not the gate panel. For stucco block walls we set galvanized hardware with proper standoffs, which moves the hinge off the face of the block and stops the moisture-rust failure we see on original installs. Heavier gates get reinforced posts or steel frame work so the first strong wind or temperature swing doesn’t leave the gate dragging a month later. Every installation gets a written price before we order a single part. The scope and process are covered on the Gate Installation in Whitney page.
Gate Motor Repair in Whitney
Whitney’s heat and grit hit gate motors hard. We see limit switches knocked out of adjustment by metal expansion, loop detectors that stop reading because a passing wash flood shifted the ground wire, and swing arms strained by gates that no longer move freely. We rebuild or replace motors, recalibrate limits, and check the full run so the next hot week doesn’t undo the fix. Most Whitney motor repairs on FAAC, BFT, Linear, and Viking units are done same visit, parts on the truck. What we cover and what a repair costs is laid out on the Gate Motor Repair in Whitney page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
Our techs work on the systems already installed in Whitney homes: FAAC swing arms, BFT and Linear slide operators, and Viking and Mighty Mule controllers among them. Common parts for those brands ride on the truck, which keeps most repairs to a single visit. Not sure what brand your opener is? We’ll identify it on arrival. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Whitney, NV
| Service | Typical range in Whitney |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $150 – $350 |
| Gate repair, major (weld, post reset, track) | $350 – $850 |
| Gate operator replacement | $650 – $1,850 |
| Swing gate motor replacement | $700 – $1,600 |
| Sliding gate motor replacement | $800 – $2,200 |
| Track and roller replacement | $250 – $600 |
| Chain-link gate install | $450 – $1,200 |
| Steel or iron gate install | $1,500 – $5,500 |
| Motor diagnostics / limit switch repair | $150 – $450 |
| Loop detector repair or replacement | $300 – $700 |
Whitney prices run higher where the wall has failed along with the gate; resetting a post in a stucco block wall costs more than a simple hinge swap, and we’ll tell you that before we start. Whatever the job, the price is written and agreed before any work begins. It doesn’t move at the door.
Neighborhoods We Serve in Whitney
We cover all of Whitney, from the older ranch-home blocks near the Whitney Mesa area to the newer stucco subdivisions along the eastern edge of the Vegas Valley. We know which streets hold 1960s chain-link gates and which hold 1990s steel sliders, and we dispatch accordingly. Typical response in Whitney is same day or next morning for most repairs.
- Whitney Mesa area
- Trail Ridge
- Whitney Ranch subdivisions
- Cambridge Park
- Boulder Highway corridor
Service Area – Cities Near Whitney
Whitney sits close to several communities we cover on the same dispatch schedule. We run regular calls in Henderson, NV, Enterprise, NV, Spring Valley, NV, and Nellis AFB, NV. If you live near the Whitney line and aren’t sure which page applies, call and we’ll sort it out.
Serving Whitney, NV - Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
Most Whitney repairs are scheduled same day or next morning. Emergency calls, including a gate stuck open overnight, get prioritized dispatch. Call (775) 307-6571 and you’ll speak to a live person who can tell you the next open window.
Some Whitney subdivisions have HOA rules covering gate height, material, and color; replacement of an existing gate typically requires no permit, but we’ll flag anything site-specific during the estimate. We install to your HOA’s written spec when one exists.
We cover all of Whitney, from Boulder Highway west to the mesa and everything between. The crew is based in the area and stages parts close by, so most service calls don’t pick up a travel delay. If you’re on the border with Henderson or Enterprise, call and we’ll confirm.
If your gate is sagging, stuck, or running a motor that won’t stop, call Carver Gate Repair in Whitney at (775) 307-6571. We’ll give you a straight read on what’s wrong, a written price before any work starts, and a one-year written guarantee on the repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.